Download latest Tool Catalogue as PDF - DICTUM GmbH

SawsFine Toothed Sawsand Back Sawsa SILKY ® MINI SAW 150Multi-purpose Japanese compact sawwith tip-hardened special tooth pattern,for cutting on the push and the pull.Also suitable for children. Slip-proof,rubberised handle, reliable blade lockingmechanism.Blade length 150 mmOverall length 260 mmBlade width 45 mmBlade thickness 0.5 mmSetting 0.85 mmRip teeth 1 mmno. 712490 20.50 € 24.40 €Repl. Blade no. 712493 13.53 € 16.10 €aBB BACK SAW FOR HARDWOOD 165Small saw that cuts on the pull stroke forfine detail work in model-building, makingmusical instruments and restorationwork. Unset saw blade with reinforcedback.Blade length 165 mmOverall length 290 mmCut depth 30 mmBlade width 0.3 mmBlade thickness 0.9 mmno. 712710 19.24 € 22.90 €www.more-than-tools.deVeritas ® Sawsavailable online.lie-nielsen ® SawsSharpened by hand:Western saws of exceptional quality, optimised for specific uses. The blade teeth of Swedish spring steel arefirst milled and set on the machine and then fine-tuned by hand. Each saw undergoes an intensive cutting testbefore it leaves the factory. Handles of curly maple, secured with traditional split-nut screws, and a solid brassback complete these premium saws.c LIE-NIELSEN ® CARCASS SAWIdeal saw for cutting tenon shoulders.Medium-fine crosscut teeth that cut onthe push stroke for fast but precise cutsacross the grain.Blade length 280 mmOverall length 410 mmCut depth 58 mmBlade thickness 0.5 mmSetting 0.75 mmTriangular teeth for cross cuts 1.9 mmno. 712027 124.37 € 148.00 €cdd LIE-NIELSEN ® TENON SAWThis backsaw with a large saw blade isperfect for deep cuts in the direction ofthe grain, such as cutting mortise andtenon joints. The well-balanced saw cutsefficiently on the push stroke and withoutjamming up to a depth of 10 cm.Blade length 405 mmOverall length 540 mmCut depth 105 mmBlade thickness 0.5 mmSetting 0.8 mmTriangular teeth for rip cuts 2.3 mmno. 712026 158.82 € 189.00 €tip frOM eXpertS:Starting the cutFor sawing out mortises or dovetails,firstly set the saw at a flat angle andsaw along the marking. Only then, tipthe saw increasingly towards the rightangleposition and saw down to theground.finger positionWith Western-style saws with pistoltypeor D handles, the index finger ispositioned on the side of the handle.As well as providing balance, this givesadditional control during cutting.Saw files for re-sharpening can be found on page 31.26