Download latest Tool Catalogue as PDF - DICTUM GmbH

Workshop Accessories & Toolkitsaa INSERTION CLAMPSolid clampfor clampingworkpiecestothe benchtop andthe front ofthe benchapron. Alsosuitable for clamping on the bench supportin the base leg of the DICK DeluxeWorkbench. Large Ø 58 mm plastic padprevents pressure points on the workpiece.Synthetic handle. Fits DICK Deluxe2000 Workbench and DICK Sculptor‘sWorkbench.Jaw opening 150 mmJaw depth 110 mmShaft diameter 25 mmno. 706328 29.33 € 34.90 €BB INSERTION CLAMP WITHTILTING HANDLEThis clamp allowsworkpieces tobe fastened onthe worktop or atthe front of theworkbench. Theergonomic handlecan be tilted by90°, which givesyou more spaceto work close tothe workpiece.Fits Ulmia andDICK Allround workbenches.Jaw opening 250 mmJaw depth 120 mmShaft diameter 30 mmno. 706329 82.77 € 98.50 €cde1f2c SQUARE BENCH DOGS SET, 1 PAIRAluminium bench dogs with steelpressure spring for fixing at the requiredheight. Fits DICK-Allround and Deluxeworkbenches. Head 34 x 20 mm,Shaft 29 x 20 mm, Length 200 mm.no. 706321 41.93 € 49.90 €dWOODEN SQUAREeBENCH DOGS, 1 PAIRBeech wood bench dogs with steel pressurespring for fixing workpieces at the requiredheight. These bench dogs are gentle onyour tools, making them particularly wellsuited for planing or for clamping delicateworkpieces. Fits DICK-WorkbenchesDeluxe and also suited for retrofittingexisting workbenches. Head 34 x 20 mm,Shaft 28 x 20 mm, Length 200 mmno. 705834 19.75 € 23.50 €VERITAS ® BRASS BENCH DOGS,1 PAIRCylindrical brass posts (Ø 18.8 mm) withside springs. The textured jaws have aninward cant (2°) to prevent the workpiecefrom slipping upwards. 2 pieces each.Fits No. 706300, 706302, 706077.Suitable auger: No. 717235.Length1 60 mm no. 705924 17.14 € 20.40 €2 110 mm no. 705925 20.67 € 24.60 €f ULMIA ® ALUMINIUM BENCH DOGS,1 PAIRRound, rotatable bench dogs with a dualball detent system. The bench dogs‘planar clamping surface can be turnedaround and adjusted to the individualform of the work piece, thus ensuring aperfect hold. Fits Ulmia-Workbenches.Length 200 mmShaft diameter 30 mmno. 706086 36.89 € 43.90 €ggALUMINUM BENCH DOGS,1 PAIRRound, rotatable bench dogs with a dualball detent system. The bench dogs‘planar clamping surface can be turnedaround and adjusted to the individualform of the work piece, thus ensuringa perfect hold. Fits DICK WorkbenchesDeluxe and also suited for retrofittingexisting workbenches.Length 200 mmShaft diameter 25 mmno. 705832 32.35 € 38.50 €hhALUMINUM FRONT BENCHDOGS, 1 PAIRWith dog holes drilled in the front of thebench skirt and these specifically developedfront bench dogs it is possible to usethe rear vise for clamping workpieces infront of the bench top. Can also be usedas a support bolt for long workpiecesthat are clamped with the front vise. FitsDICK Workbenches Deluxe and also suitedfor retrofitting existing workbenches.Length 100 mmShaft diameter 25 mmno. 705833 30.92 € 36.80 €iJi LIE-NIELSEN ® CHAIN DRIVE VISEThe mechanics of the twin-screw viseensure parallelism and almost completelyeliminate the racking common inother vises. The two independent screwassemblies allow boards to be clampedupright between the two screws. 4 bronzebushings and axial bearings ensuresmooth screw movement and reducewear. The T-piece can be fitted on theleft or right. Also suitable for retrofitting.Available in two widths (screw spacings).English mounting instructions. Max.opening 230 mm, screw Ø 28 mm. Formounting the twin-screw vise, you requireINSTALLATION KITFOR LIE-NIELSEN ® CHAIN DRIVE VISEFor mounting the Lie-Nielsen ® twin-screwvises No. 705724 and No. 705729.the installation kit No. 705728 and a32 mm (1 1/4“), 28.5 mm (1 1/8“) and22.2 mm (7/8“) drill.Lie-Nielsen ® Chain Drive Vise 12“12“ (305 mm) screw spacing. MatchingLie-Nielsen ® front vise jaw No. 705725.Weight 8.2 kgno. 705724 251.26 € 299.00 €Lie-Nielsen ® Chain Drive Vise 18“18“ (457 mm) screw spacing. MatchingLie-Nielsen ® front vise jaw No. 705726.Weight 8.2 kgno. 705729 251.26 € 299.00 €Kit includes: 1/4“drill, 5/16-18 tap,2 Allen keys (1/4“ and 1/8“), 2 hexdrivers (3/16“ and 1/4“) for a3/8“ socket wrench.no. 705728 24.79 € 29.50 €J LIE-NIELSEN ® FRONT-VISE JAWReady-made jaw for Lie-Nielsen ChainDrive Vise. The solid maple vise jaw hasall the required cavities and holes to fitthe two screws and chain drive.Oiled surface.Front-Vise Jaw 12“, 573 x 132 x 69 mmFits No. 705724.Weight 3570 gno. 705725 62.10 € 73.90 €Front-Vise Jaw 18“, 723 x 132 x 69 mmFits No. 705729.Weight 3900 gno. 705726 70.50 € 83.90 €Below shotKK LIE-NIELSEN ® BENCH VISE HANDLEHigh-quality maplevise handle. Theend caps are set offwith brass bolstersand screwed intothe handle rod withbrass scews. Thebrass bolsters are cushioned with rubberO-rings. Handle rod Ø 25 mm.Length 335 mmno. 705727 31.01 € 36.90 €Order hotline: Phone: +49-(0)991-9109-902 or +49-(0)1805-9109-902* • www.more-than-tools.de 199