Download latest Tool Catalogue as PDF - DICTUM GmbH

Rasps, FilesFiles for Wood-Based Materialsa F.D. ® WOOD FILES, CABINETThe classic file for cabinet-makers.Cut 1.1 Cut length 250 mmCross section 29 x 5.3 mmno. 704430 14.71 € 17.50 €2 Cut length 300 mmCross section 35.5 x 6 mmno. 704431 17.98 € 21.40 €B F.D. ® WOOD FILES, HALF-ROUNDSpecial knife cut for high efficiency.Cut 0.1 Cut length 200 mmCross section 21 x 6 mmno. 704433 12.02 € 14.30 €2 Cut length 250 mmCross section 25 x 7 mmno. 704432 12.94 € 15.40 €c F.D. ® ALL PURPOSE FILESIdeal for general use due to the twodifferent cuts on the flat sides. The roughside is used to remove material quicklywhile the finer side is suited for surfacefinishing. Recommended for wood, softmetals and plastic. Plastic handle.One narrow side cut.1 Cut length 200 mmCross section 20 x 5 mmno. 704434 9.24 € 11.00 €2 Cut length 250 mmCross section 25 x 6.3 mmno. 704435 11.09 € 13.20 €a 1 2 B 1 2 c 1 2Files and Rasps SetsPrice advantage!d raSp and file Set,2-piece SetPractical set for work in the field andin the workshop, consisting of the twostandard tools metal file and rasp.Comes with already fitted file handlefrom untreated pear wood.deSet contains:• Standard Half-Round Rasp 200 mmfor rough shaping of wood,No. 704602• Flat File Double Cut 200 mm forworking metal and hard plastic,No. 705007no. 705090 38.57 € 45.90 €e RASP AND FILE SET,3-PIECE SETThis set comprises the three mostcommon file and rasp models for workingwood, metal and plastic and is thus amust for every workshop. A simple toolroll protects the tools from dirt anddamage during transport.Handles included.Set includes:• Standard Half-Round Rasp 200 mmfor rough shaping, no. 704602• Classic Cabinet Wood File 250 mmfor finishing wood and soft plastic,No. 704430• Flat File Double Cut 200 mm forworking metal and hard plastic,No. 705007no. 705100 62.77 € 74.70 €Order hotline: Phone: +49-(0)991-9109-902 or +49-(0)1805-9109-902* • www.more-than-tools.de153