Download latest Tool Catalogue as PDF - DICTUM GmbH

Router Bits and Drilling ToolsRouter Bitsatungsten carbide (tc) tipped router Bits• TC is an extremely tough cutting material with high wear resistance• TC-Blades made of finest micro-grain quality for up to 60 times tool life• Where technically possible, the cutting edges are fitted at an angle to the shank• Exactly ground shanks ensure precise rotation• Secure fit in the collet (eccentricity indicated on shank)• Perfect guidance along workpieces thanks to quality ball bearings• All ball bearings can be replaced and are available as spare parts1a PREMIUM TC ROUTER BIT SETIN WOODEN BOx, SHANK Ø 8 MM12 or 22 premium hard-metal router bits,held securely in a high-quality woodenbox. Optimum selection of the most commonrouter bits at a discounted set price.1 12 pieces• 3 Straight Bits (Ø 8, 12, 16 mm x 20 mm)• Flush Trim Router Bits(Ø 12.7 x 25.4 mm)• 2 Rounding Over Bits with Ball Bearing(R 6 mm, 10 mm)• Round Nose Bit R 6 mm, Ø 12 mm• Dove Tail Bit 14°• V-Groove Bits 90°• Radius Cove Bit with Ball Bearing R 6 mm• Roman Ogee Bit R 4 mm• Chamfer Bit with Ball Bearing 45°no. 717660 64.96 € 77.30 €2 22 pieces• 6 Straight Bits(Ø 6, 8, 12, 16, 20 mm x 20 mm)• Flush Trim Router Bits(Ø 12.7 x 25.4 mm)• Rounding Over Bits R 5 mm• 2 Rounding Over Bits with Ball Bearing(R 5 mm, 8 mm)• 2 Round Nose Bit (R 4 mm, 6 mm)• Dove Tail Bit 14°• 2 V-Groove Bits (60°, 90°)• Radius Cove Bit with Ball Bearing(R 5 mm, 8 mm)• Roman Ogee Bit R 4 mm• 2 Chamfer Bit with Ball Bearing(22°, 45°)• Rabbeting Bit 9.5 mm• Bullnose Radius Bit R 3.2 mmno. 717661 117.65 € 140.00 €2B TC ROUNDING OVER BIT WITH BALL BEARING, SHANK Ø 8 MMOne bit, two profiles:Using different cutting depths, you can cut softcurves as well as rebated curves with the same bit.B21 Single Router BitShape Cutting Ø Cutting LengthR 9.5 mm 31.8 mm 15.9 mm no. 717662 34.79 € 41.40 €R 12.7 mm 38.1 mm 19 mm no. 717663 39.58 € 47.10 €R 16 mm 44.7 mm 22 mm no. 717664 48.74 € 58.00 €2 Router Bit Set, 6 pieces6 Router Bits (R 2 / 3 / 4 / 6 / 8 /10 mm) with ball bearings (Ø 12.7 mm)no. 717566 60.00 71.40 €1www.more-than-tools.dec TC COVE BIT WITH BALL BEARING, SHANK Ø 8 MMThe high-quality ball bearing (Ø 9.5 mm) helps you guide the bitexactly along the edge of the workpiece to cut a precise 1/4 curve.Shape Cutting Ø Cutting LengthR 6.0 mm 21.5 mm 9.5 mm no. 717665 26.47 € 31.50 €R 9.5 mm 28.6 mm 12.7 mm no. 717666 32.35 € 38.50 €R 12.7 mm 34.9 mm 19.0 mm no. 717667 39.58 € 47.10 €cHand routers and other power toolsavailable onlinee TC BISCUIT JOINTING SET,SHANK Ø 8 MMTurns your power router into abiscuit jointer:The set comprises an arbour (Ø 8 mmshank) with mounted slotting cutter (cuttinglength 4 mm) and three replaceableball bearings. Suitable for the three mostcommon biscuit sizes 0, 10 and 20.d TC CHAMFER BIT WITH BALL BEARING, SHANK Ø 8 MMFor the precise chamfering of edges and joining with the standard angles 45°(rectangle), 30° (six sides), 22.5° (eight sides) and 15° (twelve sides).Chamfer height max. 9.5 mm.Shape Cutting Ø Cutting Length15° 17.2 mm 9.5 mm no. 717668 24.62 € 29.30 €22.5° 19.9 mm 9.5 mm no. 717669 25.21 € 30.00 €30° 23.0 mm 9.5 mm no. 717670 25.21 € 30.00 €45° 36.0 mm 11.6 mm no. 717671 36.13 € 43.00 €In combination with the 4 mm straightplunge bit (article no. 717672), youcan use this set also for T-jointsfor partitions and false floors.Bearing Ø 22 / 26 / 30 mmCutting Length 3.97 mmCutting Ø 47 mmShank Ø 8 mmno. 717672 71.85 € 85.50 €edWooden hinges and fold-downtable topsWith a rounding-overbitand a cove bitof the samediameter youcan createelegant woodenhinges and fold-down table tops.f TC STRAIGHT PLUNGE BIT, SHANK Ø 8 MMBottom- and side-cutting straight cutter with soldered-in TC centre tip. For grooving,rebating and mortising. Suitable for plunge. For work in abrasive materials such aschipboard, MDF, plywood and hardwood.Cutting ØCutting Length4 mm 12 mm no. 717673 21.85 € 26.00 €fSafety first• All cutters comply with the EU safetystandards EN 847-1 and EN 847-2• Suitable for hand feed• Main specifications laserengravedon shankg TC BEAD & RADIUS BIT R 4.76 WITH BALL BEARING, SHANK Ø 12 MMBit with two round profiles (R 4.76 mm) that fit together perfectly. Ideal formaking roller shutters for cabinets and polygonal bodies for musical instruments.The curve enlarges the gluing surface by up to 50% as compared with a normalmitre. We advise using on a router table.Shape Cutting Ø Cutting LengthR 4.76 mm 31.9 mm 25.4 mm no. 717674 62.52 € 74.40 €gwww.more-than-tools.deMore router bits available online.172