Download latest Tool Catalogue as PDF - DICTUM GmbH

Planes»Bevel Up« planes• No chipbreaker required• Simple adjustment of cutting angleby changing bevel anglea LIE-NIELSEN ®LOW-ANGLE JOINTER PLANEIts low-angle design and the long basemake this jointer plane the ideal tool forjoints and fittings but also for use witha shooting board. In addition, its lengthmakes it an excellent tool for trueinglarge work pieces. The mouth opening isadjusted with two set screws. The bladesits bevel-up in the milled bed at a 12°angle. The bevel angle is 25°, whichresults in a cutting angle of 37°.Blade width 58 mmBlade thickness 6.4 mmOverall length 560 mmWeight 3340 gno. 702996 301.68 € 359.00 €Repl. Blade no. 702997 50.34 € 59.90 €awww.more-than-tools.deLie Nielsen ® Screwdrivers available online.B LIE-NIELSEN ® LARGE ROUTER PLANEBased on an early Stanley version, thisrouter plane is very useful for planingprecise mortises, grooves and otherrecessed areas. The improved depth-stopand fine blade adjustment allow for preciseadjustments of the square-shapedand therefore directionally stable guidediron. The blade can be fixed centrally(normal position) or close to the edge forworking corners. An included fence isfixed through elongated holes to the castiron body and can be turned around forguiding along curved edges. The openthroat design offers more visibility infront of the tool. The closed throat designis ideal for working on the edges ofboards or cleaning out the end ofa stopped groove in a rail or stile.200 x 90 mm.Blade width 9.5 mmBlade thickness 6.5 mmWeight 800 gno. 703781 121.85 € 145.00 €Repl. Blade no. 703782 31.01 € 36.90 €B»Bevel down« planes• Chipbreaker required• Cutting angle defined by frog anglelie-nielsen ® Bench planes no. 4, no. 4 1/2, no. 5, no. 6, no. 7The all-purpose woodworking plane. With its Bedrock design, thisplane allows chatter-free cutting thanks to its fully supported bladeand a mouth that can be adjusted withoutremoving the cap iron and blade. Additionallateral blade adjustment and the low bladefeedadjuster allow the cutting depth to bechanged during planing. Its heavy weightmakes irregular grain or difficult woodseasier to work. Brass frog and cap.c1c LIE-NIELSEN ®MOOTHING PLANE NO. 4The standard smoothing plane iscapable of taking the finest shavingsfrom the most difficult woods.Blade width 50 mmBlade thickness 3.2 mmOverall length 225 mmWeight 1950 g or 2100 gPlane body1 Spheroidal Cast Ironno. 703712 270.59 € 322.00 €2 Bronze no. 703736 315.97 € 376.00 €For C1 and C2Repl. Blade no. 703735 36.22 € 43.10 €Toothed Bl. no. 703738 58.74 € 69.90 €288