Download latest Tool Catalogue as PDF - DICTUM GmbH

MaterialsSteelMulti-layer Steeladtriple-layer Steelsg12a JAPANESE PM SUMINAGASHI d JAPANESE MULTI-LAYER STEEL gFLAT STEELFor the ultimate requirements:This novel Japanese blade steel leavesnothing to be desired: A core of thehardest powder metallurgical steelSG-2* makes the blade wear-resistantand tough. The 64-layered suminagashiplating, made of nickel and rustproofstainless steel, gives it aspectacular appearance.Whether used as a kitchenknife or for outdoor use,this steel impresses withits outstanding durability,sharpness retention and resistance tocorrosion. Flat stock, untempered, furtherprocessing by forging, heat treatment»SUMINAGASHI«The finest22-layer Suminagashisteelwith a mediallayer of WhitePaper Steel. Themulti-layer steelcan be ground orforged and thenhardened to produceblades ofboth incrediblesharpness and resilience. Flat steel, notstainless. Supplied unhardened with heattreatment instructions.5.5 x 33 mm x 1 minstructions included.* (C 1.3%, Cr 15%, Mo 3%, V 2%)490 x 30 x 7 mmno. 719610 54.03 € 64.30 €no. 719613 175.63 € 209.00 €250 x 40 x 3 mmno. 719627 56.13 € 66.80 €eBJAPANESE TRIPLE-LAYER STEELJapanese triplelayersteel isrenowned forits extraordinarysharpness,long edge lifeand excellentsharpenability(minimal burr).They can eitherbe ground (usingwet grinders) orforged into the desired form. Also suitablefor making Damascus steel (foldingtechniques). Semifinished product, notstainless. Supplied unhardened with instructionsfor hardening and tempering.1 Core layer »White Paper Steel«350 x 33 x 3.5 mmno. 719615 13.36 € 15.90 €2 Core layer »Blue Paper Steel«350 x 33 x 3.5 mmno. 719616 15.80 € 18.80 €JJ SWEDISH STEELSheets made of cold-rolled Uddeholmcarbon-steel for forging tool and knifeblades. Also suitable for forge welding.Comes with heat treatment instructions.Steel No. 1770 (C 0.7%, Si 0.4%, Mn0.7%, P