Download latest Tool Catalogue as PDF - DICTUM GmbH

Sculpting Toolsnative americancarving Knives (Mettgar)The traditional carving knife fromthe North-western coast of NorthAmerica fascinates with its use asa multipurpose tool. The nativeinhabitants in North America usedthe curved blades that are sharpenedon both sides in order to makea ARCH SHAPED KNIFEFor very deep hollowing out of spoons,bowls or seats.Blade width 17 mmBlade length 25 mmOverall length 215 mmno. 701670 49.50 € 58.90 €B HIGHLY CURVED KNIFEFor spots that are hard to reach and forthicker shavings of reliefs and patterns.Blade width 17 mmBlade length 30 mmOverall length 220 mmno. 701672 49.50 € 58.90 €aBcmasks, small figures, bent boxesand articles of daily use. The bladescan be used on the push or pullstroke to remove very thin shavings.The geometry of the blades helpsto create curved cuts and preventsvibrations of the knife. The largehandles made of cherry tree woodcan also be used with both handsin order to achieve an additionalleverage and control of the tool.c SLIGHTLY CURVED KNIFEFor fine texturing or smoothing out oflarger surfaces, for chip carving, cuttinggrooves to make traditional bent boxes.Blade width 17 mmBlade length 40 mmOverall length 225 mmno. 701671 49.50 € 58.90 €d MINI VERSIONFor very deep hollowing out of spoonsand other small objects.Blade width 20 mmBlade length 15 mmOverall length 165 mmno. 701610 39.92 € 47.50 €dInclusive free sharpening pass. For more information see page 3.Two free sharpeningsLifetime sharpeningElectric Carving Toolse AUTO MACH ® POWERCARVERThis electric carving tool has a reciprocatingcutting head, which allows noviceas well as professional carvers to achieveexcellent surfaces even under difficultcutting conditions. At just 800 g, thealuminium pressure-injection die-casthousing is very light yet robust andcan be used with one hand. The forgedtwo-layer cutters are ultra-sharp thanksto their cutting edge of blue paper steel(63 HRC), while the shock-absorbingsoft steel layer makes them robust andeasy to sharpen. The cutters are easyto change, thanks to the clamping nutat the cutting head, and are tightenedwith the supplied wrench. For safety, thecutter only reciprocates when the tool ispressed onto the wood surface. The heatfrom the motor is dissipated throughcooling slits so that the tool can be usedin non-stop operation.Set contains: Powercarver,No. 715222 sweep 1 / 6 mm;No. 715220 sweep 7 / 6 mm;No. 715217 sweep 7 / 12 mm;No. 715221 sweep 7 bent / 6 mm;No. 715223 V-tool 90°/ 10 mm.Comes with German and Englishinstructions.Overall length 240 mmWeight 800 gno. 715210 297.48 € 354.00 €ef 1 23 45 67 8f BITS FOR AUTO MACH ® POWERCARVER, DOUBLE-LAYER STEELForged two-layer cutters with a cutting edge of blue paper steel (63 HRC)ultra-sharp and easy to sharpen.SweepBlade width1 1 straight 6 mm no. 715222 11.85 € 14.10 €2 3 9 mm no. 715219 13.11 € 15.60 €3 6 long, bent 12 mm no. 715216 13.11 € 15.60 €4 7 3 mm no. 715211 11.85 € 14.10 €5 7 6 mm no. 715220 11.85 € 14.10 €6 7 12 mm no. 715217 11.85 € 14.10 €7 7 18 mm no. 715213 17.98 € 21.40 €8 7 21 mm no. 715214 17.98 € 21.40 €9 7 bent 6 mm no. 715221 11.85 € 14.10 €10 V Cutter 45° 5 mm no. 715212 11.85 € 14.10 €11 V-Cutter 90° 3 mm no. 715218 11.85 € 14.10 €12 V Cutter 90° 10 mm no. 715223 11.85 € 14.10 €9 1011 12g BITS FOR AUTOMACH ® POWERCARVER, HSSRobust bit made of creep-resistantHSS steel for an extra-long edge life.Sweep 1 flatBlade width 21 mmno. 715215 20.92 € 24.90 €g58