Download latest Tool Catalogue as PDF - DICTUM GmbH

Woodturning Toolsa ONEWAY ® CHUCKS, STRONGHOLDThe advantage of this self centering4 jaw chuck lies in its heavy design.Suitable for large objects, this chuckoffers security in almost all clampingsituations. It is easy to handle singlehandedwith the help of the includedchuck key. This way you can use yourother hand to position the workpiece.The body, manufactured out of onepiece, is low vibrating and rotatesaccurately. A nickel coating protectsthe chuck from rust. The case hardenedjaw slides, made from chrome-nickelsteel,are extremely wear resistant andrun smoothly and exactly in the toothedguiding. Recommended for Woodturninglathes with a swing from 200 mm on.The set contains a taper lock adaptor,premium profiled jaw`s size 2, chuckkey, woodworm screw, Allen key.different taper lock adapter needed?No problem: We carry a whole line ofspecial adapters that can be orderedupon request.Jaws # 2:external chucking 44 – 82 mm /internal chucking 60 – 101 mm.Model M33 x DIN 800Ø 105 mmWeight 3.6 kgno. 702158 249.50 € 296.90 €aB ONEWAY ® , TOWER JAWS,PREMIUM PROFILED SERRATEDTower jaws will excel when it comes down to turning long pieceswithout tailstock support. It is possible to fix workpieces byclamping or spreading them. The serration on the inside of thejaws safely fixes the workpiece. The shape of the inner jaws isnot completely round but angled. This patented design enablesthe jaws to safely clamp square stock and minimises thedamage of the surface. The jawsBalso have more contact points thanconventional serrated jaws whenclamping round stock. This enablesa higher clamping force.Model TalonSize External chuck. Internal chuck.2 12–66 mm 51–85 mm no. 702149 44.96 € 53.50 €3 85–114 mm 98–130 mm no. 702151 50.84 € 60.50 €Model StrongholdSize External chuck. Internal chuck.2 51–85 mm 70–108 mm no. 702130 50.84 € 60.50 €3 92–127 mm 111–149 mm no. 702132 55.88 € 66.50 €e ONEWAY ® SPIGOT JAWS, DOVETAIL PROFILEFor clamping smaller pieces these spigot jaws are theright choice. It is possible to fix workpieces by clamping orspreading them. The outside and inside surface of the jaws issmooth and not serrated. Thisenables you to gently clamp roundeworkpieces. Only low clamping forcecan be practiced due to the nonserratedinside surface.Model TalonExternal chuck. Internal chuck.6–44 mm 27–63 mm no. 702143 33.53 € 39.90 €Model StrongholdExternal chuck. Internal chuck.9–50 mm 25–66 mm no. 702122 40.25 € 47.90 €c ONEWAY ® SPIGOT JAWS,PREMIUM PROFILED SERRATEDFor clamping smaller pieces these spigot jaws are the rightchoice. It is possible to fix workpieces by clamping or spreadingthem. The serration on the inside of the jaws safely fixesthe workpiece. The shape of the inner jaws is not completelyround but angled. This patented design enables the jaws tosafely clamp square stock and minimizes the damage of thesurface. The jaws also have morecontact points than conventionalcserrated jaws when clamping roundstock. This enables a higher clampingforce.Model TalonExternal chuck. Internal chuck.9–41 mm 25–60 mm no. 702142 33.53 € 39.90 €Model StrongholdExternal chuck. Internal chuck.12–66 mm 28–66 mm no. 702121 40.25 € 47.90 €f ONEWAY ® , DOVETAIL JAWSThe outside and inside surface of thejaws is smooth and not serrated.This enables you to gently clamp roundworkpieces. Only low clamping forcecan be practiced due to the nonserratedinside surface.Model TalonSize External chuck. Internal chuck.2 41–73 mm 51–90 mm no. 702145 30.08 € 35.80 €3 66–95 mm 85–120 mm no. 702147 37.73 € 44.90 €Model StrongholdSize External chuck. Internal chuck.2 51–89 mm 66–114 mm no. 702124 36.05 € 42.90 €3 92–127 mm 111–152 mm no. 702126 41.09 € 48.90 €4 108–136 mm 127–165 mm no. 702128 49.50 € 58.90 €fg ONEWAY ® FLAT JAWS FORINDIVIDUAL CLAMPING SITUATIONSWooden blocks are screwed to the face ofthe jaws whichare then turned.gThis way you areable to make yourown custom gripjaw set.Model Talonno. 702154 34.37 € 40.90 €Model Strongholdno. 702136 34.37 € 40.90 €d ONEWAY ® PREMIUM PROFILED SERRATED JAWSSerrated jaws are used during all standard clamping situations.It is possible to fix workpieces by clamping or spreading them.The serration on the inside of the jaws safely fixes the workpiece.The shape of the inner jaws is not completely round butangled. This patented design enables the jaws to safely clampsquare stock and minimizes the damage of the surface.The jaws also have more contact pointsthan conventional serrated jaws whendclamping round stock. This enablesa higher clamping force.Model TalonSize External chuck. Internal chuck.3 73–101 mm 85–117 mm no. 702146 41.09 € 48.90 €Model StrongholdSize External chuck. Internal chuck.3 98–133 mm 114–152 mm no. 702125 46.64 € 55.50 €4 114–146 mm 124–165 mm no. 702127 48.66 € 57.90 €h ONEWAY ® , FACEPLATE SEGMENTSThese segments make it possible to clamp complex shapes inorder to finish them, e.g. pieces without stub. No matter, whetheryou have to work round, oval or angled pieces, the movablerubber nobs keep hold of each workpiece. The clamping force islimited due to the construction of the jaws. In order to achievelarger dimensions of the segments they have been produced outof aluminium. This way the centrifugal forces are minimizedcompared to steel segments.Model TalonSize External chuck. Internal chuck.1 51–200 mm 101–251 mm no. 702152 77.23 € 91.90 €2 73–273 mm 124–298 mm no. 702153 82.77 € 98.50 €Model StrongholdSize External chuck. Internal chuck.1 76–216 mm 127–257 mm no. 702133 77.23 € 91.90 €2 70–279 mm 120–305 mm no. 702134 82.77 € 98.50 €3 44–355 mm 120–381 mm no. 702135 104.96 € 124.90 €hAn overview table with chuckingcapacity of the single jaws can be foundonline at www.more-than-tools.deOrder hotline: Phone: +49-(0)991-9109-902 or +49-(0)1805-9109-902* • www.more-than-tools.de 141