cabarrus county board of commissioners regular meeting november ...

October 17, 2011 (Regular Meeting)PageExterior walls certainly represent the greatest portionof a structurevisible from the exterior. Much of the quality and constructiontechnique isreflected in the exterior wall type. ONE or TWO exterior wall types may bemarked and entered in the appropriate spaces.Whenever possible mark onlyone exterior wall; however, when the structure does haverelatively largeareas of two distinct types of exterior walls, ls, then markas appropriate. Ifthe wall type is a one digit number it should be entered as 01, 02, etc.When only one exterior wall type is marked it must beassigned to columns 33-34 and columns 35 - 36 must be zero filled.Codes 01 - 22 are generallyresidential while all codes are used for commercial.ROOF STRUCTURE AND ROOF COVEROne roof structure must be picked which best corresponds to the observed roofstructure. Residential codes are 1 to 6 and 8 while commercial are 7 to 13.One roof cover must be picked which is the predominant roof cover. The covershould be evident and its condition should be of no concern. If it is verybadly damaged by fire or wind, additional depreciation should be applied.Single digit entries should be marked as 01, 02, etc.INTERIOR WALL CONSTRUCTIONDRAFTOne or two items may be marked. If the interior of the structure has a largeproportion of two distinct wall types (this commonly would occur when youhave a paneled wall and drywall), both would be marked. If only one field ismarked it must be shown in column 41 and column 42 must be zero filled.INTERIOR FLOORINGA-1Page 107