! j I I - National Roofing Contractors Association

SeamProcessingMetal Roof Panels1. COMPANY NAME ECI Building C~ts, I~. ECI Building C~ts, I~.2. PRODUCT NAME R-Ser;es Roofing Panels TR-Series Roofing Panels3. Architectural Appllcatlona (yes/no) yes yesStructural Appllcatlona (yes/no) no no4. PANEL CONFIGURATION4A Panel Deacription Roll Formed Integral Box Rib Standing Seam Roll Formed Snap-on Batten Standing Se..48. Panel Materials, Thicknesses, and Finishes Thicknesses Finished or Unfinished Thicknesses Finished or Unfinished================ ===========================================z= ==============================galvanized steel (ga.) 24,26 Kynar 500, silicon polyester, 24,26 Kynar 500, silicon polyester,..,finished..,finishedstainless steel (ga.)galvalume(ga.) 24,26 Kynar 500, silicon polyester 24,26 Kynar 500, silicon polyester,..,finished..,finishedaluminized steel (ga.)aluminum (In.) 0.032 Kynar500, silicon polyester, 0.032 Kynar500, silicon polyester,..,finished..,finishedanodized aluminum (In.)copper (oz.) 16 16I terne metal (ga.) 26 Terne-coated stainless steel 26 Terne-coated stainless steelzinc (ga.)4C. Maximum Length (II.) 40 4012,14,143/4,16,163/4,18,183/4,20,203/4,4D. Panal Widths (In.) 12,15,18 22,22 1/2,22 3/45. SYSTEMS REQUIREMENTSISA Minimum Slope (In. per ft.) 3: 12 3: ~258. Solid Decking (required, optional, or not uaad)requl redrequl red5C. Underlayment (type or NA) 30-lb. tel t 30-lb. tel t6. PANEL PROFILE Vertical Trape- Batten Other Vertical Trape- Batten Otherleg zoidal leg ooidal- I I X X I I7. SEAM PROCESSING, HEIGHT, AND SEALANT Height(s) Se.. Sealant Height(s) Se.. Sealant(ins_) F=factoryapplied (ins.) F=factoryappliedE=field applied E=field appliedN=noneN=noneoverlappedcrimped (45 degree)roll formed (180 degrees)double roll formed (2 180 degrees)roll and lock X 1 /3/4 Nanap-on cap X 1 Fsnap together8. FASTENING METHOD8A. Through fastened, exposed88. Through fastened, concealed8C Clip, concealedfixed clipslip clip X Xmoveable clip (daalgned allowable movement, Ins.)9. Specialty Appllcatlonacurvedtaperedother10. Manulacturer/ProductD8t8 Engineering Year of Licensed Kind of Engineering Year of Licensed Kind ofS'WOrt First Applicator Applicator S'WOrt First Applicator ApplicatorAvailable Ccomercial Agreeflent Training Available Ccomercial Agreeflent Training(yes/no) Use (yes/no) Available (yes/no) Use (yes/no) Available11. ASTM E331 _ryes 1981 no field yes 1982 no field0 seminars seminarsFor sales information, contact: Harry Laursen Harry LaursenFor technlcallnlormatlon, contact: Richard Gamble Richard GambleInfIltration Taat Reaults -- --12. ASTM E283 Air InfIltration Teat Results -- --13. FM-UL Wind Uplift Ratlngalor Any Specification UL-90 UL-9014. See Appendix If CheckedNA = not applltZla