New! - Norman Equipment Co.

ZSD TECHNICAL DATAMECHANICAL SPECIFICATIONSOperating TemperatureOperating HumidityStorage TemperatureOperating FrequencyMechanical LifeShock Operating Extremes 100m/s 2Resistance Damage Limits 1000m/s 2–25°C to +60°C (no freezing)45% to 85% RH maximum(no condensation)–40°C to +80°C (no freezing)1,200 operations/hourPosition 1•2•1: 1,000,000 minimumPosition 1•2•3•1: 100,000 minimumVibration Operating Extremes 5 to 55Hz, amplitude 0.5mm minimumResistance Damage Limits 16.7Hz, amplitude 1.5mm minimumTerminal Pulling Strength 20N minimumTerminal Screw Torque0.5 to 0.6NmDegree of ProtectionIP65WeightApprox. 240g (ZSD6)Approx. 210g (ZSD5)Conforming to StandardsApprovalsIEC60947-5-1, EN60947-5-1,JIS C8201-5-1, ANSI/RIA R15.6UL, CSA, BGELECTRICAL SPECIFICATIONSContact Resistance100mΩ maximumBetween live & dead metal parts:Insulation Resistance100MΩ maximum (at 500VDC)Between positive & negative live parts:100MΩ minimum (at 500VDC)Impulse WithstandVoltageElectrical LifeRecommended Wire SizeRecommended CableConditionalShort Circuit Current2.5kV100,000 cycles (min.) @max. load16 - 26 AWG.275 - .512 inch diameter50A (250V)Recommended Short 250V/10A fast-blow fuse (IEC 60127-1)Circuit ProtectionContact Rating 2A @ 30V, 4A @ 125V3ACCESSORIESPart NumberZSD-HDescriptionMetal holding bracket(for mounting/holding aZSD enabling device)DIMENSIONS (mm)86174 94654 58ZSD5/6x 1.5Note: Model with top-mounted pushbutton shown.93