New! - Norman Equipment Co.

SERIES TZF/TZM AVAILABLE MODELS AND ACCESSORIESAVAILABLE STANDARD MODELS(Includes 1 ⁄2" NPT Plastic Conduit Adapter and TZ/CO Standard Actuator key)Part Number Contacts DescriptionTZFCS/96-*TZMC/96-*2NC & 2 NO(NC contactsin series)2NC & 2 NO(NC contactsin series)*Please specify solenoid operating voltage viaaddition of one of the following suffix codes:Voltage Add Suffix24VDCNo Suffix115VAC -115230VAC -230Example: TZMC/96-115Actuating key locked by spring and unlocked by energizing solenoidwith right-side key entry. (Field-rotatable for entry from front or rear).Actuating key locked by energizing solenoid and unlocked by springwith right-side key entry. (Field-rotatable for entry from front or rear).(See Note 1 below)Note 1: Use of this model permits the guard to beopened in the event of a power failure.Generally accepted safety standards/practicessuggest this model only be used after conductinga thorough risk evaluation in the context ofthe application.2OPTIONAL ACTUATOR KEYS & ACCESSORIESPart NumberDescriptionTZ/COTZ/CWTZ/CORTZ/CKTZ/CWRTZ/COF/HIS.1TZ/COF/HIS.2TZ/CORF/HIS.1TZ/CORF/HIS.2TZ-69TZ-75AZS2305FWS1205BStandard straight actuator key (13" minimumclosing radius)Right-angled straight actuator key (11.8" minimumclosing radius)Radial entry actuator key (11.8" minimum closingradius)Short straight actuator key (6.3" minimum closingradius)Right-angled bent actuator key (11.8" minimumclosing radius)Pivoting straight actuator key (rear-mounted)(13.8" minimum closing radius)Pivoting straight actuator key (top-mounted)(13.8" minimum closing radius)Pivoting straight actuator key (rear-mounted)(7.1" minimum closing radius)Pivoting straight actuator key (top-mounted)(5.9" minimum closing radius)Straight safety interlock auxiliary release key (forTZFCS/96 models only)Right-angled safety interlock auxiliary release key(for TZFCS/96 models only)Fail-to-Safe Timer (Please see page 74)Fail-to-Safe Standstill Monitor (Page 76)59