New! - Norman Equipment Co.

OSSD FAILCOSSD FAILCSafety light curtains and safety light gridsSLC 210...RFM/S3545 ==2440B10 A10• Safety light curtain• Control category Type 2 to IEC/EN 61496-1, -2• Resolution 30, 40 and 50 mm• Protection field height-Master from 310 mmto 1510 mm• Protection field height-Slave from 160 mmto 1510 mm• Integrated start/restart interlock• Integrated contactor control• Cascading of Master and Slave devices• Range from 0 ... 18 m• Semiconductor outputs• Optical synchronisation• Status display• Protection class IP 65SLG 210...RFM/S3545 = =2440• Safety light grid• 2- oder 3-beam light grid• Protection field heights 510 mm,or 810 mmLegend:A: Total length Slave / Master (B + 91 mm) B: Protection field height C: 85 mm (SLC)B10 A10Technical dataStandards: IEC/EN 61496-1/-2Control category toIEC/EN 61496-1, -2 Type 2Enclosure:AluminiumEnclosure dimensions:35 x 45 mmConnection: (Emitter): connector plugM 12, 5-pole,(Receiver): connector plugM 12, 8-poleMax. cable length:100 m(Master/Slave) 50 mProtection class: IP 65 to EN 60529Response time:5,5 - 28 ms(depends onlength and resolution)Detection sensitivity (Resolution): 30, 40and 50 mmProtection field height:(Resolution 30 mm): 160 ... 1510 mm(Resolution 40, 50 mm): 310 ... 1510 mm(2-, 3-beam): 510, 810mmProtection field width, range: 0 ... 18 mStart/restart interlock:integratedContactor control:integratedCascading (Master/Slave):possibleLight emission wavelength: 950 nm (infrared),codedUe: 24 VDC ± 20%Safety outputs:2 x PNP, 500 mALeakage current: *Safety outputs:< 0,3 mAPower consumption: Emitter 2 W,Receiver 3 WData interface: –Status and diagnostics: 7-segment andLED displayAmbient temperature: 0 °C … + 55 ºCStorage andtransport temperature: – 20 °C … + 70 ºCApprovalsOrdering detailsSLC 210-E/R➀-➁-RF➂No. Replace Description➀ xxxx Protected heights (mm)Available lengths:0160 mm 0310 mm0460 mm 0610 mm0760 mm 0910 mm1060 mm 1210 mm1360 mm 1510 mm➁ 30 Resolution 30 mm40 Resolution 40 mm50 Resolution 50 mm➂ M MasterfunktionSSlavefunktionApprovalsOrdering detailsSLG 210-E/R➀-RF-➁No. Replace Description➀Distance betweenoutermost beams:0500-02 500 mm, 2-beam0800-03 800 mm, 3-beam➁ M Master functionSSlave functionMounting brackets and T-slots are included inthe delivery.Different lengths and resolutions can becombined for Master/Slave.* In case of failure (interruption of the 0 V supply)the maximum leakage current is 0.3 mA.Ordering detailsAccessories:Connector plug M 12 x 1for emitterKD M12-5-5 mKD M12-5-15 mfor emitter (pre-wiring possible,however without cable)R = angled connector KD M12-5-RS = straight connector KD M12-5-Sfor receiverKD M12-8-5 mKD M12-8-15 mfor Master/ SlaveconnectionFurther accessories can befound on pages 292-294.VL M/S-M12-5-0,3 mVL M/S-M12-5-3 mVL M/S-M12-5-5 mVL M/S-M12-5-10 m277