New! - Norman Equipment Co.

AZM161 TECHNICAL DATAMECHANICAL SPECIFICATIONSHousingGlass-fibre reinforced selfextinguishingthermoplasticActuator KeyStainless steel(defeat-resistant design)Degree of Protection IP67Unlocked Holding Force 30N (7 pounds)Travel for Positive-Break 8mm (0.315 inches)Force to Reach10N (Approx. 2.4 pounds)Positive-BreakClosing ForceApprox. 15 N (3.4 pounds)Operating Temperature –13°F to +104°FMechanical Life1 million operationsConformity to Standards IEC 947-5-1EN 60947-5-1DIN VDE 0660-200BG-GS-ET-15ULCSASolenoid Locking ForceKey Return ForceMinimum Closing Radius2,000N (440 pounds)0N5.9" (150mm) with B1 and B1Eactuating key3.7" (95mm) with B6 actuating keyELECTRICAL SPECIFICATIONSContactsFine silverContact Configuration Double-pole, double-break withelectrically separated contactbridgesContact Gap2 × 2 mm (minimum)Contact Rating4A (230VAC)Switching ActionSlow-action, positive-break NCcontactsShort Circuit Protection Fuse 6A (time-delay)Rated Insulation Voltage 250VACRated Impulse6kVWithstand VoltageType Terminals*Screw terminals with self-liftingclamps for up to 13 AWG flexiblestranded wire (2.5mm 2 )Available Solenoid24VDC, 110VDC, 230VDCSupply Voltages (Vs) 24VAC/50Hz115VAC/60Hz230VAC/50HzSolenoid Power10W (maximum)ConsumptionSolenoid Duty Cycle 100%Solenoid Pull-in Voltage (0.85 to 1.1) VsSolenoid Drop-out Voltage (0.2 to 0.75) Vs*Optional cage clamp terminations available.Please consult factory.SWITCHING DIAGRAMS & CONTACT SCHEMATICS (Solenoid-mechanism not energized)AZM 161SK-12/12rkAZM 161SK-12/12rka52Note: Above diagrams are with actuator key inserted and solenoid de-energized.