New! - Norman Equipment Co.

Z/T335 TECHNICAL DATAMECHANICAL SPECIFICATIONSHousingDiecast aluminum with enamelfinishOperating Temperature –22°F to +195°F (–30°C to +90°C)Mechanical Life30 million operationsMaximum Operating Rate 5000 operations/hourBounce TimeZ335 Series: < 2 msT335 Series: Function of cam speedChangeover Time Z335 Series: < 2 ms for cam speedof 1 mm/minuteT335 Series: Function of cam speedDegree of Protection IP67Conformity to Standards IEC 947-5-1EN 60947-5-1DIN VDE 0660 Part 200BG-GS-ET-15DIN EN 50041CSA-C22.2 No. 14 (Suffix -1577)UL508 (Suffix -1594)ELECTRICAL SPECIFICATIONSContactsContact ConfigurationContact GapContact RatingSwitching ActionShort Circuit ProtectionRated Insulation VoltageRated ImpulseWithstand VoltageType TerminalsFine silverDouble-pole, double-break withelectrically-separated contactbridgesZ335 Series: 2x0.03 inchesT335 Series: 2x0.16 inches4A/230VAC2.5A/400VACZ335 Series: Snap-action withpositive-break NCcontactsT335 Series: Slow-action,positive-break NCcontactsFuse: 10A (time delay)16A (no time delay6A (time delay) as positivebreakposition switch500VAC6kVScrew terminals, maximum2.5mm 2 (AWG13) wireSNAP ACTION CONTACT SYSTEMSSLOW ACTION CONTACT SYSTEMSSlow Action SwitchT335Snap Action SwitchZ335LED INDICATOR MODELSGreen LED (gn) indicator supply voltage and yellow LED (ye) indicator for switch operation ofNO or NC contacts for 24VDC. Available for all models of Series 335.Shown here:Z4VH 335-11zG24Wiring diagram:7Shown here:indication of operation of NC contact(terminals 21-22);for indication of operation of NO contact useterminals 13-14protected against wrong polarity connectionprotected against transient voltages 700VAttention: no inductive loads245