New! - Norman Equipment Co.

More documents

Recommendations

Info

BNS300 TECHNICAL DATAMECHANICAL SPECIFICATIONSHousingFiberglass reinforced thermoplastic (BNS300)Brass, nickel-plated (BNS30)Switching Distance “S”* “On”: 5mm (0.2")“Off”: 15mm (0.6")Degree of Protection IP67Operating Temperature –13°F to +158°FOperating Principle MagneticShock Resistance 30g/11msVibration Resistance 10 to 55 Hz, amplitude 1mmConformity to Standards CE, UL, CSAVDE 0660 Part 209EN954-1EN1088BG-GS-ET-14*Without ferromagnetic material in vicinity of switch or magnet. Theproximity of ferrous material may affect switching distances.ELECTRICAL SPECIFICATIONSMaximum Supply VoltageMaximum ContinuousCurrent RatingMaximum SwitchingCapacity (Power Rating)Type Connection*24VDC30mAVoltage: 250VACCurrent: 3A (750VA)1 meter long LiYY4* 0.25mm2(23AWG) pre-wired pigtail*Longer prewired cables (3M, 5M, or 10M lengths) availableon request. Also available with M12x1 quick-connect. Pleaseconsult factory.DIMENSIONS & WIRING DETAILS6.24361.422.08ø2.08x 1.5.0690°M 301.20ø 4,5.1814.5515.59301.18mminch783.07BN 24 VDCBKBKBU 30 mABNS300-01-zGL+L-100040ø301.182.0815.59ø2.0814.55ø 371.46BPS 300 (Ideal for use in the food industry)5Note: BNS300 reed switch assemblies should be mounted at least 50mm (2") apart.MISALIGNMENT ALLOWANCE145
SERIES BNS333Coded-Magnet Sensors withIntegral Safety Control ModuleFeatures & Benefits• Compact size … ideal for limited space applications.• Sealed for submersibility … assures long-term reliabilityin the most hostile environments.• Tamper-resistant … cannot be bypassed with simplemagnets.• Rugged, corrosion-resistant housing … tolerates mostindustrial environments.• Integral LED status indicators … facilitate easyinstallation and provide visual indication of switch status.• Shock and vibration tolerant … designed to withstandmechanical abuse.• Integral reed switch monitoring/control module …detects faults in reed switch array. Satisfies EN954,Category 1.AVAILABLE STANDARD MODELS(Please order BPS300 or BPS303 magnet separately)ContactPart NumberConfiguration*DescriptionDescriptionThe Series BNS333 coded-magnet sensors are designed foruse as a safety interlock switch on movable machineguards/articulating robot arms. Each sensor set consists of amultiple reed switch unit and a coded-magnet actuator. Thereed switches, wired in series, will only close in the presenceof their matched magnetic field array.In addition, the BNS333 features an integral monitoring andcontrol circuit which detects faults in the reed switch array(satisfying EN954, Category 1 without use of an ancillarysafety circuit monitoring module).Their tamper-resistant design prevents bypassing with asimple magnet or improperly coded magnetic field. Inaddition, the BNS module features an optional built-in LEDdisplay of switch status.OperationThe reed switch assembly is typically mounted to a stationaryportion of a guard structure, with the coded-magnet assemblymounted to the movable element of the machine guard. Whenthe guard is closed, and the matched magnetic field alignswith the reed switch unit, the switches will close. When theguard is open, or the required magnetic-field array is notproperly aligned with the reed switch assembly, the sensoroutput will remain “off.”BNS333-01YU** 1 NCMultiple reed switch(24VAC/DC/40mA) assembly withintegral switch monitoringand control module.Actuation from rear (“U”)BNS333-01YD**Same as above butactuation from front(“D”)BNS333-01YL**Same as above butactuation from left (“L”)BNS333-01YR**Same as above butactuation from right (“R”)BNS333-01YV**Same as above butactuation from top (“V”)BPS300N/ACoded-magnet actuator(front mount)BPS303***N/ACoded-magnet actuator(rear mount)*Contact configuration in presence of BPS300 or BPS 303coded-magnet actuator.**The BNS333 is a 4-wire sensor designed to satisfy EN954,Category 1 requirements. It is not designed for use with aseparate safety controller.***Available with stainless steel outer jacket. Please consultfactoryTypical ApplicationsThe sealed, compact BNS333 is ideal for use on movablemachine guards in hostile environments. Typical applicationsinclude food processing equipment, chemical processingequipment, woodworking machinery, packaging machinery,and articulating robot arm rest position sensing.BPS300 ActuatorBPS303 Actuator***146
Page 1 and 2:
GK-1 CATALOG-HANDBOOK • NINTH EDI
Page 3 and 4:
TZGPICTORIAL PRODUCT INDEXSDGAZ335S
Page 6:
ALPHANUMERIC PRODUCT INDEXProductSe
Page 17 and 18:
AZ17 TECHNICAL DATAMECHANICAL SPECI
Page 19 and 20:
SERIES AZ17ziIndividually-Coded Mov
Page 21 and 22:
AZ17zi TECHNICAL DATAMECHANICAL SPE
Page 23 and 24:
SERIES AZ15/16DescriptionThe Series
Page 25 and 26:
AZ15/16 TECHNICAL DATAMECHANICAL SP
Page 27 and 28:
AZ15/16 ACTUATOR KEY SPECIFICATIONS
Page 29 and 30:
SERIES AZ16ziIndividually-Coded Mov
Page 31 and 32:
AZ16zi TECHNICAL DATAHousingActuato
Page 33 and 34:
SERIES AZ 200Pulse-Echo BasedNon-Co
Page 35 and 36:
SERIES TZGDescriptionThe Series TZG
Page 37 and 38:
TZG TECHNICAL DATAMECHANICAL SPECIF
Page 39 and 40:
SERIES SDGDescription®The Series S
Page 41 and 42:
SDG TECHNICAL DATAMECHANICAL SPECIF
Page 43 and 44:
SERIES AZ335Tamper-Resistant Movabl
Page 45 and 46:
AZ335 INDIVIDUALLY-CODED ACTUATOR K
Page 47 and 48:
SERIES SHGVCable-less Keyed Mechani
Page 49 and 50:
SERIES AZ415DescriptionThe AZ415 Se
Page 51 and 52:
AZ415 TECHNICAL DATAACTUATOR KEY DI
Page 53 and 54:
42SaferbyDesign
Page 55 and 56:
SERIES AZM170DescriptionThe AZM170
Page 57 and 58:
AZM170 TECHNICAL DATAMECHANICAL SPE
Page 59 and 60:
48AZM170 TECHNICAL DATADIMENSIONS10
Page 61 and 62:
AZM161Solenoid-Latching Safety Inte
Page 63 and 64:
AZM161 TECHNICAL DATAMECHANICAL SPE
Page 65 and 66:
SERIES AZM 200New!Pulse-Echo BasedN
Page 67 and 68:
SERIES MZM 100Non-Contact Magnetic-
Page 69 and 70:
SERIES TZF/TZMDescriptionThe TZF/TZ
Page 71 and 72:
SERIES TZF/TZM TECHNICAL DATAMECHAN
Page 73 and 74:
SERIES TKF/TKMDescription®The TKF/
Page 75 and 76:
SERIES TKF/TKM TECHNICAL DATAMECHAN
Page 77 and 78:
SERIES TZKDescriptionThe TZK Series
Page 79 and 80:
SERIES TZK TECHNICAL DATAMECHANICAL
Page 81 and 82:
SERIES AZM415DescriptionThe AZM415
Page 83 and 84:
AZM415 TECHNICAL DATAWIRING SCHEMAT
Page 85 and 86:
AZS 2305Fail-To-Safe TimerSafety Ca
Page 87 and 88:
FWS 1205Fail-To-Safe Standstill Mon
Page 89 and 90:
FWS 2505Fail-To-Safe Standstill Mon
Page 91 and 92:
80SaferbyDesign
Page 93 and 94:
SERIES STSSafety Guard Door-Handle
Page 95 and 96:
SERIES STSTO ORDER COMPLETE STS DOO
Page 97 and 98:
SERIES STS ACCESSORIESLockout Acces
Page 99 and 100:
SERIES B25Safety Door Handle System
Page 101 and 102:
SERIES TG-1Door Handle For Use With
Page 103 and 104:
SERIES ZSD3-Position Hand-Held Enab
Page 105 and 106: SERIES GFSSafety Foot Switch®Featu
Page 107 and 108: GFS SERIES TECHNICAL DATAMECHANICAL
Page 109 and 110: SERIES SEPK(G)New!2-Hand Control Co
Page 111 and 112: Series TFA/TFIGuard Alignment AidNe
Page 113 and 114: ZS71Emergency Cable-Pull Switch (Me
Page 115 and 116: ZS71 TECHNICAL DATAMECHANICAL SPECI
Page 117 and 118: ZS73 Heavy-Duty Emergency Cable-Pul
Page 121 and 122: ZS75 Heavy-Duty Emergency Cable-Pul
Page 125 and 126: Series ZS441 Heavy-Duty Emergency C
Page 127 and 128: ZS441 TECHNICAL DATAMECHANICAL SPEC
Page 129 and 130: ZS75S BidirectionalHeavy-Duty Bidir
Page 131 and 132: ZS75S BIDIRECTIONAL TECHNICAL DATAR
Page 133 and 134: ZS80 Emergency Cable-Pull Switch (M
Page 137 and 138: S900Cable-Pull Switch Wire Tensione
Page 139 and 140: 128SaferbyDesign
Page 141 and 142: SERIES BNS250Coded-Magnet SensorsFe
Page 145 and 146: SERIES BNS33 & BNS33SCoded-Magnet S
Page 147 and 148: BNS33 TECHNICAL DATAMECHANICAL SPEC
Page 149 and 150: SERIES BNS33SStainless Steel Coded-
Page 151 and 152: SERIES BNS36Coded-Magnet SensorsNew
Page 155: SERIES BNS30 & BNS300Coded-Magnet S
Page 159 and 160: SERIES BNS16Coded-Magnet SensorsFea
Page 161 and 162: SERIES BZ16Dual-Channel Non-Contact
Page 163 and 164: SERIES BNS-B20New!Coded-Magnet Sens
Page 165 and 166: SERIES CSS 180New!Pulse-Echo BasedN
Page 167 and 168: SERIES CSS 34Pulse-Echo Based Compa
Page 171 and 172: AES 1102/AES 1112BNS Compatible Con
Page 173 and 174: AES 1135/AES 1165BNS Compatible Saf
Page 175 and 176: AES 1235/AES 1265BNS Compatible Saf
Page 177 and 178: AES 2135BNS Compatible Safety Contr
Page 183 and 184: SERIES SRB 211 ANBNS Compatible Saf
Page 185 and 186: AES 2285/SRB 207 AN BNS Compatible
Page 189 and 190: SERIES AZ 200Pulse-Echo BasedNon-Co
Page 191 and 192: SERIES AZ 200 TECHNICAL DATAMECHANI
Page 193 and 194: SERIES AZ 200 WIRING EXAMPLESWIRING
Page 195 and 196: SERIES AZM 200New!Pulse-Echo BasedN
Page 197 and 198: SERIES AZM 200 TECHNICAL DATAMECHAN
Page 199 and 200: SERIES AZM 200 WIRING EXAMPLESWIRIN
Page 201 and 202: SERIES MZM 100Non-Contact Magnetic-
Page 203 and 204: SERIES MZM 100 DIAGNOSTICSFunction
Page 205 and 206: SERIES CSS 180New!Pulse-Echo BasedN
Page 207 and 208:
SERIES CSS 180 TECHNICAL DATASWITCH
Page 209 and 210:
SERIES CSS 180 WIRING EXAMPLE 2Seri
Page 211 and 212:
SERIES CSS 34Pulse-Echo Based Compa
Page 213 and 214:
SERIES CSS 34 TECHNICAL DATASWITCHI
Page 215 and 216:
SERIES CSS 34 WIRING EXAMPLE 2Wirin
Page 217 and 218:
COMPATIBLE PULSE-ECHO SAFETY CONTRO
Page 219 and 220:
208SaferbyDesign
Page 221 and 222:
SERIES TESFDescriptionThe TESF Seri
Page 223 and 224:
SERIES TESF TECHNICAL DATADIMENSION
Page 225 and 226:
Series TESZHinged Safety Interlock
Page 227 and 228:
Series ES95 SBHinged Safety Interlo
Page 229 and 230:
Series TVS335Hinged Safety Interloc
Page 231 and 232:
Series T.C 235/236Hinged Safety Int
Page 233 and 234:
T.C 235 TECHNICAL DATAContact funct
Page 235 and 236:
T.C 236 TECHNICAL DATAContact funct
Page 237 and 238:
226SaferbyDesign
Page 239 and 240:
SERIES Z/T235Safety-Rated, Positive
Page 241 and 242:
Z/T235 TECHNICAL DATAContact functi
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
SERIES Z/T236Safety-Rated, Positive
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
SERIES Z/T335Heavy-Duty Safety-Rate
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
SERIES Z/T336Heavy-Duty Safety-Rate
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
SERIES Z332Heavy-Duty Safety-Rated,
Page 269 and 270:
Z332 TECHNICAL DATAContact function
Page 271 and 272:
SERIES C50Compact, Safety-Rated,Pos
Page 273 and 274:
262SaferbyDesign
Page 275 and 276:
264SaferbyDesign
Page 277 and 278:
Introduction - Optoelectronic safet
Page 279 and 280:
Design and operating principleOptoe
Page 281 and 282:
ApplicationSafety distanceEN 999Saf
Page 283 and 284:
Modes of operation and functionsMas
Page 285 and 286:
274SaferbyDesign
Page 287 and 288:
OSSD FAILCOSSD FAILCSafety light cu
Page 289 and 290:
Page 291 and 292:
Safety light curtains and safety li
Page 293 and 294:
Page 295 and 296:
Safety light grid (retro-reflector)
Page 297 and 298:
Safety light curtains and safety li
Page 299 and 300:
CCSafety light curtains and safety
Page 301 and 302:
Safety light grids with integrated
Page 303 and 304:
==Accessories for safety light curt
Page 305 and 306:
294SaferbyDesign
Page 307 and 308:
Safety monitoring modules for optoe
Page 309 and 310:
Safety monitoring modules for optoe
Page 311 and 312:
300SaferbyDesign
Page 313 and 314:
Safety light barriersSLB 2002030,8
Page 315 and 316:
Safety light barriersSLB 200-C• T
Page 317 and 318:
Safety light barriersSLB 400-C• T
Page 319 and 320:
Safety light barriers accessories S
Page 321 and 322:
SERIES SMS 3Safety Pressure MatsFea
Page 323 and 324:
SERIES SMS 3 COMPATIBLE SAFETY CONT
Page 325 and 326:
OPTIONAL JUNCTION BOX FOR MULTIPLE
Page 327 and 328:
316SaferbyDesign
Page 329 and 330:
SERIES SEOptical Safety Edges/Bumpe
Page 331 and 332:
SERIES SE TECHNICAL DATAAluminum Mo
Page 333 and 334:
SERIES SE TECHNICAL DATATransmitter
Page 335 and 336:
SERIES SE TECHNICAL DATASE 304CElec
Page 337 and 338:
326SaferbyDesign
Page 339 and 340:
ModelSRB 201 ZHSRB 301 HC/ROperatin
Page 341 and 342:
SERIES SRB 201 ZH &SRB 301 HC/RTwo-
Page 343 and 344:
SERIES SRB 202 MSLMuting Safety Con
Page 345 and 346:
SERIES SRB 206 &SRB 206 SQGeneral P
Page 347 and 348:
SERIES SRB 211 ANGeneral Purpose Sa
Page 349 and 350:
SERIES SRB 211 STGeneral Purpose Sa
Page 351 and 352:
SERIES SRB 301 LC &General Purpose
Page 353 and 354:
SERIES SRB 301 MCGeneral Purpose Sa
Page 355 and 356:
SERIES SRB 301 STSERIES SRB 301 ST
Page 357 and 358:
Page 359 and 360:
SERIES SRB 202 C &SRB 400 CDifferen
Page 361 and 362:
SERIES SRB 401 LCGeneral Purpose Sa
Page 363 and 364:
SERIES SRB 402 EM &SRB 401 EM-115VS
Page 365 and 366:
Page 367 and 368:
SERIES PROTECT-IE-02 &PROTECT-IE-11
Page 369 and 370:
358SaferbyDesign
Page 371 and 372:
360
Page 373 and 374:
I. Man-Machine SafeguardingPrincipl
Page 375 and 376:
364FIGURE 2Conventional versus Posi
Page 377 and 378:
7What is meant by a “positive lin
Page 379 and 380:
10What are “self-checking,” “
Page 381 and 382:
15Why are safety interlock switches
Page 383 and 384:
II. Control Reliability19What is me
Page 385 and 386:
22What are “redundant” logic ci
Page 387 and 388:
III. Risk Assessment26What is “ri
Page 389 and 390:
29Which of these risk category safe
Page 391 and 392:
IV. Safety Standards,Marking and th
Page 393 and 394:
38To what type machines does the Eu
Page 395 and 396:
42Why should safety controllers be
Page 397 and 398:
VI. Applications and Solutions46Wha
Page 399 and 400:
Frequently Asked QuestionsSelection
Page 401 and 402:
I. Selection & Application Characte
Page 403 and 404:
5What light curtain resolutions are
Page 405 and 406:
10What is “muting”?“Muting”
Page 407 and 408:
14What questions might I ask to bet
Page 409 and 410:
17How do I calculate the correct
Page 411 and 412:
19After doing the “safety distanc
Page 413 and 414:
24Must light curtains only be used
Page 415 and 416:
IV. Standards & Certifications30Doe
Page 417 and 418:
Blanking (Fixed Blanking):“Fixed
Page 419 and 420:
OSSD:“OSSD” is the abbreviation
Page 421 and 422:
SELECTED MACHINE SAFEGUARDINGTERMIN
Page 423 and 424:
Point-of-Operation: the area(s) of
Page 425 and 426:
Safety Enable: (See “Authorized O
Page 427 and 428:
prEN1760-1 Safety of Machinery - Pr
Page 429 and 430:
418SaferbyDesign
Page 431 and 432:
TypeDesignation420123NEMA, UL, CSA
Page 433 and 434:
GENERAL TERMS & CONDITIONS OF SALEO
Page 435:
424NOTES
show all

New! - Norman Equipment Co.

Create successful ePaper yourself

Delete template?

Save as template?