eud-1282_en/1.0 - Aastra 5380/5380ip - TeleBolaget

Using the display and operating elementsKeysUsing the FoxkeyThe Foxkey has variable functions. These functions are displayed above the key. Severalcontacts are stored under the broad Foxkey, which means you need to press theFoxkey precisely under the function you want.Press the Foxkey under the position where the display shows the function youwant.Keep the Foxkey held down for a moment (about 2 seconds).Using the Aastra M535 expansion key moduleThe configurable keys of the expansion key module Aastra M535 can be operated asthe other configurable keys. In addition, there are the following extensions:• If you remove an Aastra M535 or if you modify the order of the connected expansionkey modules, the keys configuration does not change.• The M535 display contrast applies to all connected Aastra M535 expansion keymodules.• The Aastra M535 display’s Backlight setting is taken from the phone.• The Aastra M535 has 3 levels with 15 configurable keys each.Shift key:Allows to switch between the 3 levels. Press 1 x each to display the next level.LED display:Indicates which level is activated.➔If, for example, you are on level 3 of the Aastra M535 expansion key moduleand an event occurs on level 1, the event is signalled by the red blinking LEDin position 1.22 eud-1282/1.0 – R1.0 – 12.2010