SDISC Assembler Call - NetEx

CONF010E TYPE missing in LOCALNET statement: ‘network name’Explanation: The type operand was missing from the LOCALNET statement. It is required for allnetworks.System Action: Free up memory allocated to network and get next card.CONF011E NETADDR missing in ADAPTER/LINK statement: ‘label’Explanation: The NETADDR operand is missing from the ADAPTER or LINK statement. It is requiredfor all adapters/links.System Action: Ignore statement, free up memory allocated to adapter or link and get next card.CONF012E MODEL missing in ADAPTER/LINK statement: ‘label’Explanation: The MODEL operand is missing from the ADAPTER or LINK statement. It is requiredfor all adapters/links.System Action: Ignore statement, free up memory allocated to adapter or link and get next card.CONF013E TRUNK missing from ADAPTER/LINK statement: ‘label’Explanation: A trunk operand is missing from the ADAPTER or LINK statement. At least onemust be specified (and not more than 4). It is required for all adapters/links.System Action: Ignore statement, free up memory allocated to adapter or link and get next card.CONF014E CHANADDR missing in ADAPTER statement: ‘label’Explanation: The CHANADDR operand is missing from the ADAPTER statement. It is requiredfor PB22x/NB22x Adapters.System Action: Ignore statement, free up memory allocated to adapter and get next card.CONF015E RATE invalid in PORT statement: ‘rate’Explanation: An invalid rate was specified in a PORT statement.System Action: Ignore statement, free up memory allocated and get next card.CONF016E SMGDREF: ‘hexvalue’ must have rightmost 2 bits = PORT: ‘value’Explanation: A DREF was encountered that has the value ‘hexvalue’. The low-order 2 bits mustequal the port number ‘value’.System Action: Ignore statement, free up memory allocated and get next card,CONF017E DEST missing in PORT statement: ‘label’Explanation: The DEST operand is missing from the PORT statement. It is required for all adapters.System Action: Ignore statement, free up memory allocated to port and get next card.CONF018E RATE missing in PORT statement: ‘label’Explanation: The RATE operand is missing from the PORT statement. It is required for the A142Adapters.System Action: Ignore statement, free up memory allocated to port and get next card.CONF019E Invalid adapter model: ‘model’Explanation: The MODEL operand specified an invalid adapter model number in the ADAPTER orLINK statement.System Action: Ignore statement, free up memory allocated to adapter or link and get next card.CONF020E NUMADDRS encountered without CHANADDR: ‘label’Explanation: The NUMADDRS operand was encountered but no CHANADDR was previously defined.System Action: Ignore statement, free up memory allocated to adapter and get next card.CONF021E Invalid PORT number ‘number’Explanation: The PORT operand is out of the range 0..3 in an ADAPTER or LINK statement.System Action: Ignore statement, free up memory allocated to adapter or link and get next card.Page 114 Appendix B. ConfMang Messages MAN-REF-H307IP-04