Complete (13 MB) - Chris Alston's Chassisworks

To prevent the urethane bushingsfrom squeaking in action, use thesupplied silicone grease to coat allsides of the urethane bushing thatcontact a metal surface. A thinscrewdriver can be used to smear itaround inside the bushing. Takeextra care not to get this grease allover, it’s very sticky.To open up the bushings, use thehandle end of the balljoint wrenchthat is included in the suspension kit.Once the slot in the bushing isopened, slide it over the antiroll barnear the 90-degree bend.#917701 Page 34