Complete (13 MB) - Chris Alston's Chassisworks
Complete (13 MB) - Chris Alston's Chassisworks
Complete (13 MB) - Chris Alston's Chassisworks
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Jack the clip up with the frame on a slightangle. The front of the clip needs to beabove the rear. This will allow you to slideit up above the valance. Be careful not tobend the valance. Once the front of theframe is above the valance, jack the frameup so it is flat against its middle and rearbody mounts.Lower the front of the frame just enough toinstall the lower half of the urethane bodymount.Install the upper half of the urethane bodymount and screw the 1/2” bolt into theframe at least 1/2”, however, the bushingmust be loose.#917701 Page 77