Complete (13 MB) - Chris Alston's Chassisworks

Install the lower shock spud first. Insert themale shock spud from the front of the carinto the lower A-arm. Insert the female partof the spud from the back, it acts as the nut.Use Loctite to secure threads.Using the spindle shaft as a handle, line upthe top eye of the shock in the upper mountand slide the male spud in. Insert thefemale part of the spud from the back, it actsas the nut. Use Loctite to secure threads.With both halves in place, use two Allenwrenches to tighten the spud together.Tighten them until they stop, the correctamount of crush is calculated into theirlength.#917701 Page 42