Complete (13 MB) - Chris Alston's Chassisworks

Next, slide the link eyebolt onto the end ofthe antiroll bar.Shown here is the hardware used to attachthe link eyebolt to the antiroll bar.Attach the link eyebolt to the antiroll bar.Place the internal tooth lock washer next tothe head of the 3/8-16 x 3/4” button headallen and the beveled stainless steelwasher. Apply Loctite to the button headallen and tighten.Put the star lock washer, bushing washerand one urethane bushing on the 3/8-16 x 21/4 socket head allen. This attaches the linkeyebolt to the lower A-arm. Apply siliconegrease to the bushing on all surfaces.#917701 Page 37