MY1 Mechanically Jointed Rodless Cylinder

Series MY1B29Floating BracketFacilitates connection to other guide systems.Applicable bore sizeø80, ø100Application ExampleMounting bracketGuideWWorkpieceBracketSlider(Piston yoke)Floating Bracket Operating PrecautionsCautionMake sure that the amount of divergence from theexternal guide is within the adjustable range.Using the floating bracket facilitates connection to an externalguide. However, with a rod type guide, etc., the amount ofdisplacement is large and the floating bracket may not be able toabsorb the variation. Check the amount of displacement andmount the floating bracket within the adjustable range.When the displacement amount exceeds the adjustable range,use a separate floating mechanism.Mounting ExampleSupport bracket mounting area is heat treated at HRC40 or above.Floating with flat bar Floating with round barBracket150+0.320 +0.1+0.3112Floating BracketPositioning hole(ø10 x 18l ) Bracket mounting hole (ø80)Hexagon socket head cap screw (M10 x 1.5 x 40l)Mounting bracketBracket mounting hole (ø100)Hexagon socket head cap screw (M12 x 1.75 x 40l)A3118CBModelMY-J 80MY-J100Applicable bore sizeMY1B80MY1B100A181221B (max)1515C (min)99Hexagon SocketHead Cap ScrewTighteningTorqueModelMY-J80MY-J100(N·m)Tightening torque2544Note) • Flat bar or round bar mounting are possible for the support bracket(slanted lines) mounted by the customer.• The floating bracket is shipped together with (4) hexagon socket headcap screws and (2) parallel pins at the time of shipment.• “B” and “C” indicate the allowable mounting dimensions for the supportbracket (flat bar or round bar).• Consider support brackets with dimensions that allow the floatingmechanism to function properly.8-11-30