MY1 Mechanically Jointed Rodless Cylinder

Mechanically Jointed Rodless CylinderCam Follower Guide TypeSeries MY1C62Side SupportSide support AMY-SA2-øGCDAB2-øHFEMXMTSSide support BMY-SBMYCY2-JMGCXCDABED--XModelMY-S16MY-S20MY-S25MY-S32MY-S40MY-S63ABABABABABABApplicable bore sizeMY1C16MY1C20MY1C25MY1C32MY1C40MY1C50MY1C63A B C71.679.695118142164202616781100120142172152535455570D E F G26 4.9 3 6.538 6.4 4 850 8 5 9.564 11.7 6 1180 14.8 8.5 14100 18.3 10.5 17.5H3.44.55.56.6911.5(mm)JM4 x 0.7M5 x 0.8M6 x 1M8 x 1.25M10 x 1.5M12 x 1.7520-DataGuide for Side Support ApplicationFor long stroke operation, the cylindertube may be deflected depending on itsown weight and the load weight. In sucha case, use a side support in the middlesection. The spacing (l ) of the supportmust be no more than the values shownin the graph on the right.Caution1. If the cylinder mounting surfaces arenot measured accurately, using a sidesupport may cause poor operation.Therefore, be sure to level the cylindertube when mounting. Also, for longstroke operation involving vibrationand impact, use of a side support isrecommended even if the spacingvalue is within the allowable limitsshown in the graph.2. Support brackets are not for mounting;use them solely for providing support.lmmmlll(kg) 200190180170160150140130Weight (m)1201101009080706050403020100(2400)(2000)(1600)(1400)(1200)(1000)(900)MY1C20MY1C16MY1C25MY1C32MY1C40MY1C50MY1C631000 2000 3000 4000 5000Support spacing (l )(mm)8-11-65