Part 2: RECAP STANDARD MODULE - Smart Vend Corporation

RECAP Software User's GuidePart 2: StandardCost GroupsAccumulatorsThe Cost Group setup screen lets you set up the cost parameters for yourstandard controllers.Each type of controller has different cost group settings.This section describes the steps involved in setting up each of the differenttypes of cost groups.Follow these instructions to set up the Accumulator Cost group:1 From the main menu set up screen, highlight STANDARD and presse.A screen appears listing the four controller types in the Standard module(Accumulators, Card Centers, Terminals, and Towers). HighlightACCUMULATOR and presse. A second screen appears (Figure 3-1)listing the setup options for that controller. Highlight COST and presse.2 If you don’t have any Cost groups defined yet, the next screen is the CostConfiguration Setup screen (Figure 3-2).NoteIf you already have one or more Cost groups defined, a screen pops uplisting those Cost groups. To edit one of those groups, highlight it andpress e. This brings you to the Cost Configuration screen,Figure 3-2.Figure 3-2:Accumulator Cost Configuration Screen3-2 Standard Equipment Setup and Configuration Cost Groups