Part 2: RECAP STANDARD MODULE - Smart Vend Corporation

RECAP Software User's GuidePart 2: StandardHow theStandardModule isOrganizedMost of the information you will need to set up your Standard system iscontained in Part 1 of the RECAP Software User’s Guide. Part 2 describesdetails that are specific to the Standard system.The specifics of Standard operation covered here include:• Chapter 1, “What the Standard Equipment Module Covers,” is thecurrent chapter. It contains the Table of Contents, and also gives anoverview of this manual.• Chapter 2, “Planning the Standard Setup,” describes the setup menuconfiguration screens.• Chapter 3, “Configuring the Standard Setup,” describes how to useRECAP for Standard software to set up and manage your Standard systemoperations.• Chapter 4, “Collecting Data and Downloading ConfigurationInformation,” describes how to transfer information between RECAP forStandard software and the Standard controllers.• Chapter 5, “Generating Reports,” describes how to print reports withRECAP for Standard systems.• Chapter 6, “Standard Utilities,” describes RECAP Utilities specific toStandard systems.1-2 What the Standard Equipment Module Covers How the Standard Module is Organized