Part 2: RECAP STANDARD MODULE - Smart Vend Corporation

RECAP Software User's GuidePart 2: StandardCard CentersFollow these instructions to create Card Center control groups:1 From the main menu set up screen, highlight STANDARD and presse.A screen appears listing the four controller types in the Standard module(Accumulators, Card Centers, Terminals, and Towers). Highlight CARDCENTER and press e. A second screen appears listing the setupoptions for that controller. Highlight CONTROL and presse.2 If you don’t have any control groups defined yet, the next screen is theControl Configuration setup screen (Figure 3-8).NoteIf you have already created one or more control groups, a screen pops uplisting the groups. To edit a group, highlight it and presse. This bringsyou to the Control Configuration screen, Figure 3-8.3 Enter an alphanumeric description for the Control group. Use a name thatmakes some sense to you, or that reminds you of specific units you’reworking with. For instance, the group description could be “Building 5,” or“Executive Office.” Type in the description and presse.Figure 3-8:Card Service Center Control Configuration Screen3-14 Standard Equipment Setup and Configuration Control Groups