01.12.2012 Views

Tender No.: 465S/2011/12 - City of Cape Town

Tender No.: 465S/2011/12 - City of Cape Town

Tender No.: 465S/2011/12 - City of Cape Town

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Tender</strong> <strong>No</strong>.: <strong>465S</strong>/<strong>2011</strong>/<strong>12</strong><br />

3.11 POLE TO POLE BELT LIGHTS (Streamers)<br />

3.11.1 SITE LOCATIONS FOR POLE TO POLE BELT LIGHTS (Streamers)<br />

3.11.1.1 Southern Region<br />

� Gugulethu 1<br />

� Parkwood<br />

3.11.1.2 <strong>No</strong>rthern Region<br />

� Koeberg<br />

� Woodstock<br />

3.11.1.3 Eastern Region<br />

� Somerset West<br />

3.11.2 POLE TO POLE BELT LIGHTS (Streamers) SPECIFICATION<br />

3.11.2.1 The light bulbs for the Belt Lights (Streamers) must be as follow:<br />

� For static lights - 240V 7W fused Energy saving golf ball type<br />

� For flashing lights - 240V 15W fused Golf ball type<br />

3.11.2.2 The Belt Lights (Streamers) must be 2.5mm² 2 core cable. Cable cores must be insulated<br />

red and black. Outside cable insulation must be black. The lamp holders in on the cables<br />

must be black polyurethane bayonetted type, 230V 2A. The top and bottom <strong>of</strong> lamp holder<br />

must be fixed together with silver plated screws and nuts. The top part must connect to the<br />

cable with double brass spikes. The lamp holders to be IP65 rated.<br />

3.11.3 POLE TO POLE BELT LIGHTS (Streamers) INSTALLATION SPECIFICATION<br />

3.11.3.1 Belt Lights (Streamers) must be installed on a catenary wire which must be mounted from<br />

one streetlight pole to another.<br />

3.11.3.2 Belt Lights (Streamers) must be fixed to the 4mm catenary wire by means <strong>of</strong> cable ties.<br />

3.11.3.3 All wiring <strong>of</strong> pole Belt Lights must be finished and it must be ensured that the <strong>City</strong> <strong>of</strong> <strong>Cape</strong><br />

<strong>Town</strong> Electricity Services can do the termination <strong>of</strong> the Belt Lights (Streamers) at the dinky<br />

connectors, to the existing electrical supply network.<br />

3.11.3.4 Ensure that there are no loose hanging wires. All wires need to be made neat by means <strong>of</strong><br />

cable ties.<br />

3.11.3.5 After installation, the <strong>City</strong> <strong>of</strong> <strong>Cape</strong> <strong>Town</strong> Electricity Services must be informed and an<br />

inspection must be done.<br />

3.11.3.6 In the case where the installation is not as required, or if there is any defects with respect to<br />

the installation, design or sequence <strong>of</strong> the pole Belt Lights, the Contractor need to fix that<br />

defect with no additional cost or claim.<br />

50

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!