Grundfos Alldos DDI-209 User Manual - Industry Surplus Australia

3. Transport and intermediate storage3.1 Transport4. Technical data4.1 IdentificationCautionDo not throw or drop the pump.3.2 DeliveryThe DDI 209 dosing pump is delivered in acardboard box. Place the pump in the packagingduring transport and intermediate storage.3.3 UnpackingRetain the packaging for future storage or return, ordispose of the packaging in accordance with localregulations.3.4 Intermediate storage• Permissible storage temperature:–10 °C to +50 °C.• Permissible air humidity: max. relative humidity:92 % (non-condensing).3.5 ReturnReturn the pump in its original packaging orequivalent.The pump must be thoroughly cleaned before it isreturned or stored. It is essential that there are notraces of toxic or hazardous media remaining on thepump.CautionGrundfos Alldos accepts no liability fordamage caused by incorrecttransportation or missing or unsuitablepackaging of the pump!Before returning the pump to Grundfos Alldos forservice, the safety declaration at the end of theseinstructions must be filled in by authorised personneland attached to the pump in a visible position.CautionIf a pump has been used for a mediumwhich is injurious to health or toxic, thepump will be classified ascontaminated.If Grundfos Alldos is requested to service the pump,it must be ensured that the pump is free fromsubstances that can be injurious to health or toxic.If the pump has been used for such substances,the pump must be cleaned before it is returned.If proper cleaning is not possible, all relevantinformation about the chemical must be provided.If the above is not fulfilled, Grundfos Alldos canrefuse to accept the pump for service. Possible costsof returning the pump are paid by the customer.The safety declaration can be found at the end of theseinstructions.Fig. 1 DDI 209 nameplatePos. Description1 Type designation2 Model3 Maximum capacity [l/h]4 Voltage [V]5 Frequency [Hz]6 Product number7 Country of origin8 Year and week code9 Marks of approval, CE mark, etc.10 Maximum pressure [bar]11 Serial numberTM03 8687 2207CautionThe replacement of the power supplycable must be carried out by anauthorised Grundfos Alldos serviceworkshop.11