OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

More documents

Recommendations

Info

Service as RequiredIMPORTANT: Whenever the air cleaner has beenserviced or cover has been removed,ALWAYS fully depress the airrestriction indicator reset button (ifequipped) to assure accurate readings.8. If equipped, fully depress air restriction indicator resetbutton and release to reset indicator.RG41165,000008B–19–27JUL06–2/245-7 110306PN=112
Service as RequiredReplacing Fan and Alternator BeltsRefer to CHECKING BELT TENSIONER SPRINGTENSION AND BELT WEAR in Lubrication andMaintenance/250 Hour/6 Month Section for additionalinformation on the belt tensioner.1. Inspect belts for cracks, fraying, or stretched out areas.Replace if necessary.2. To replace belt with automatic tensioner, releasetension on belt using a breaker bar and socket (ifrequired) on tension arm.To replace belt with manual tensioner, release tensionat belt tensioner (See MANUAL BELT TENSIONERADJUSTMENT in Lubrication and Maintenance/250Hour/6 Month Section.)290 mm (11.4 in.) Fan Height and Lower*RG11950 –UN–07NOV013. Remove poly-vee belt from pulleys and discard belt.4. Install new belt, making sure belt is correctly seated inall pulley grooves. Refer to belt routing at right for yourapplication.5. Apply tension to belt with tensioner. Remove socket.6. Start engine and check belt alignment.*Measured from crank centerline to fan drive center.338 mm (13.3 in.) Fan Height and Higher Without FreonCompressor*RG11951 –UN–07NOV01A—AlternatorCSP—Crankshaft PulleyFC—Freon (A/C) CompressorFD—Fan DriveI—Idler PulleyT—TensionerCP—Coolant Pump402 mm (15.8 in.) Fan Height With Freon Compressor*RG11952 –UN–07NOV01OURGP12,000004C–19–29JUL04–1/145-8 110306PN=113
Page 1 and 2:
PowerTech4.5 L and 6.8 LNon-Certifi
Page 3 and 4:
Introduction• PE4045TF151• PE40
Page 5 and 6:
IntroductionPOWERTECH ® 4.5 L Engi
Page 7 and 8:
ContentsPagePageRecord Keeping Inst
Page 9 and 10:
Record KeepingPOWERTECH ® Medallio
Page 11 and 12:
Record KeepingEngine Option CodesEn
Page 13 and 14:
Record KeepingRecord Fuel Injection
Page 15 and 16:
SafetyReplace Safety SignsReplace m
Page 17 and 18:
SafetyService Machines SafelyTie lo
Page 19 and 20:
SafetyPractice Safe MaintenanceUnde
Page 21 and 22:
SafetyRemove Paint Before Welding o
Page 23 and 24:
SafetyAvoid Harmful Asbestos DustAv
Page 25 and 26:
SafetyProtect Against High Pressure
Page 27 and 28:
Fuels, Lubricants, and CoolantDiese
Page 29 and 30:
Fuels, Lubricants, and CoolantBio-D
Page 31 and 32:
Fuels, Lubricants, and CoolantMinim
Page 33 and 34:
Fuels, Lubricants, and CoolantDiese
Page 35 and 36:
Fuels, Lubricants, and CoolantOILSC
Page 37 and 38:
Fuels, Lubricants, and CoolantGreas
Page 39 and 40:
Fuels, Lubricants, and CoolantWater
Page 41 and 42:
Fuels, Lubricants, and CoolantEthyl
Page 43 and 44:
Fuels, Lubricants, and CoolantEthyl
Page 45 and 46:
Engine Operating GuidelinesInstrume
Page 47 and 48:
Engine Operating GuidelinesThe rese
Page 49 and 50:
Engine Operating GuidelinesG—Batt
Page 51 and 52:
Engine Operating GuidelinesIMPORTAN
Page 53 and 54:
Engine Operating GuidelinesAuxiliar
Page 55 and 56:
Engine Operating GuidelinesNOTE: El
Page 57 and 58:
Engine Operating GuidelinesNormal E
Page 59 and 60:
Engine Operating GuidelinesChanging
Page 61 and 62: Engine Operating GuidelinesUsing a
Page 63 and 64: Lubrication and MaintenanceObserve
Page 65 and 66: Lubrication and MaintenanceCheck Ai
Page 67 and 68: Lubrication and MaintenanceReplace
Page 69 and 70: Lubrication & Maintenance/DailyCAUT
Page 71 and 72: Lubrication & Maintenance/Daily4. I
Page 73 and 74: Lubrication & Maintenance/250 Hour/
Page 95 and 96: Lubrication & Maint./2000 Hour/24 M
Page 107 and 108: Service as RequiredAdding CoolantCA
Page 109 and 110: Service as RequiredReplacing Axial
Page 111: Service as RequiredReplacing Radial
Page 115 and 116: Service as RequiredChecking Air Com
Page 117 and 118: Service as RequiredIMPORTANT: Do no
Page 119 and 120: Service as RequiredOn DENSO and Mot
Page 121 and 122: Troubleshooting50-2 110306PN=121
Page 123 and 124: TroubleshootingWiring Diagram (Stan
Page 125 and 126: TroubleshootingEngine Wiring Diagra
Page 127 and 128: TroubleshootingSymptom Problem Solu
Page 133 and 134: StorageEngine Storage Guidelines1.
Page 135 and 136: Storage15. Store the engine in a dr
Page 137 and 138: SpecificationsGeneral OEM Engine Sp
Page 139 and 140: SpecificationsPOWER RATINGS ON DYNA
Page 147 and 148: SpecificationsEngine Model Oil Pan
Page 149 and 150: SpecificationsEngine Crankcase Oil
Page 151 and 152: SpecificationsMetric Bolt and Screw
Page 153 and 154: Lubrication and Maintenance Records
Page 155 and 156: Lubrication and Maintenance Records
Page 157 and 158: Emission System WarrantyU.S. EPA Em
Page 159 and 160: John Deere Service Literature Avail
Page 161 and 162: IndexPagePageA Check ..............
Page 163 and 164:
IndexPagePageEngine serial number .
show all

OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?