OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

Lubrication & Maintenance/250 Hour/6 MonthChanging Engine Oil and Replacing FilterNOTE: Change engine oil and oil filter for the first timeafter 100 hours maximum of operation, then every250 hours thereafter.If John Deere PLUS-50 ® or ACEA E4 or E5 engine oil anda John Deere oil filter are used, the oil and filter changeinterval may be extended by 50 percent.OILSCAN ® or OILSCAN PLUS ® is a John Deere samplingprogram to help you monitor machine performance andidentify potential problems before they cause seriousdamage. OILSCAN ® and OILSCAN PLUS ® kits areavailable from your John Deere engine distributor orservicing dealer. Oil samples should be taken prior to theoil change. Refer to instructions provided with kit.Oil FilterRG11616 –UN–24OCT01To change engine oil and oil filter:1. Run engine approximately 5 minutes to warm up oil.Shut engine off.2. Remove oil pan drain plug (arrow).3. Drain crankcase oil from engine while warm.Oil Pan Drain PlugRG4881 –UN–29NOV88NOTE: Drain plug location may vary, depending on theapplication.A—Oil Filter ElementPLUS-50 is a trademark of Deere & Company.OILSCAN is a trademark of Deere & Company.OILSCAN PLUS is a trademark of Deere & Company.Continued on next pageOURGP12,0000078–19–31OCT06–1/330-2 110306PN=73