OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

Engine Operating GuidelinesStopping the Engine1. Disengage clutch (if equipped) controlling enginedrivelines.2. Move the throttle (A) to slow idle on standard(mechanical) governor engines.IMPORTANT: Before stopping an engine that hasbeen operating at working load, idleengine at least 2 minutes at 1000–1200rpm to cool hot engine parts.For engines in generator setapplications, where the governor islocked at a specified speed and no slowidle function is available, run engine forat least 2 minutes at fast idle and noload.3. Turn key switch (B) to "OFF" position to stop theengine. Remove ignition key.North American Standard Instrument Panel ShownRG11299J –UN–11SEP00IMPORTANT: Make sure that exhaust stack cap (raincap) is installed when engine is notrunning. This will prevent water and dirtfrom entering engine.A—ThrottleB—Key SwitchExhaust Stack Rain CapRG10616 –UN–16JUN00RG,RG34710,5563–19–07JAN02–1/115-16 110306PN=60