OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

Engine Operating GuidelinesIMPORTANT: DO NOT add makeup oil until the oillevel is BELOW the ADD mark ondipstick. John Deere ENGINE BREAK-INOIL (TY22041) should be used to makeup any oil consumed during thebreak-in period.3. Check engine oil level more frequently during enginebreak-in period. If oil must be added during this period,John Deere ENGINE BREAK-IN OIL is preferred. SeeENGINE BREAK-IN OIL, in Fuels, Lubricants, andCoolant Section.RG8028A –UN–15JAN99Crosshatch Pattern On Oil DipstickA—Crosshatch Pattern On Oil DipstickIMPORTANT: DO NOT use PLUS-50 ® Engine Oilduring the break-in period of a newengine or engine that has had a majoroverhaul. PLUS-50 ® oil will not allow anew or overhauled engine to properlywear during this break-in period.DO NOT fill above the crosshatchpattern (A) or the FULL mark, whicheveris present. Oil levels anywhere withinthe crosshatch are considered in theacceptable operating range.SpecificationEngine 1 —Oil Pressure at FullLoad Rated Speed ................................. 345 ± 103 kPa (3.45 ± 1.03 bar)(50 ± 15 psi)Minimum Oil Pressure at RatedSpeed ..................................................................... 275 (2.75 bar) (40 psi)Minimum Oil Pressure at 850 rpm ................. 105 kPa (1.05 bar) (15 psi)Coolant Temperature Range................................82°–94°C (180°–202°F)PLUS-50 is a trademark of Deere & Company.1At normal operating temperature of 115°C (240°F) sump.Continued on next pageOURGP12,0000076–19–09SEP04–2/415-7 110306PN=51