OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

SafetyRemove Paint Before Welding or HeatingAvoid potentially toxic fumes and dust.Hazardous fumes can be generated when paint is heatedby welding, soldering, or using a torch.Remove paint before heating:• Remove paint a minimum of 100 mm (4 in.) from areato be affected by heating. If paint cannot be removed,wear an approved respirator before heating or welding.• If you sand or grind paint, avoid breathing the dust.Wear an approved respirator.• If you use solvent or paint stripper, remove stripper withsoap and water before welding. Remove solvent orpaint stripper containers and other flammable materialfrom area. Allow fumes to disperse at least 15 minutesbefore welding or heating.TS220 –UN–23AUG88Do not use a chlorinated solvent in areas where weldingwill take place.Do all work in an area that is well ventilated to carry toxicfumes and dust away.Dispose of paint and solvent properly.DX,PAINT–19–24JUL02–1/1Service Cooling System SafelyExplosive release of fluids from pressurized coolingsystem can cause serious burns.Shut off engine. Only remove filler cap when cool enoughto touch with bare hands. Slowly loosen cap to first stopto relieve pressure before removing completely.TS281 –UN–23AUG88DX,RCAP–19–04JUN90–1/105-8 110306PN=21