12.07.2015 Views

OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Lubrication and MaintenanceLubrication and Maintenance Service IntervalChart—Generator (Standby) ApplicationsNOTE: Use service intervals listed below for generator(standby) applications. Match service items belowto titles in Lubrication and Maintenance Sectionsfor procedures.Lubrication and Maintenance Service IntervalsEvery 2 250 Hours or 500 Hours or 2000 HoursItem Weeks 12 Months 12 Months or 24 Months As RequiredOperate Engine at Rated Speed and 50%–70% Load a•Minimum of 30 MinutesCheck Engine Oil and Coolant LevelCheck Fuel Filter(s)/Water Separator BowlCheck Air Cleaner Dust Unloader Valve & Indicator aPerform Visual Walkaround InspectionService Fire ExtinguisherChange Engine Oil and Replace Oil Filter bCheck Engine MountsService BatteryClean Crankcase Vent TubeCheck Air Intake Hoses, Connections, & SystemReplace Single or Dual Fuel Filter ElementsCheck Belt Tensioner and Belt WearCheck Engine SpeedsCheck Engine Electrical Ground ConnectionCheck Cooling SystemCoolant Solution Analysis-Add SCAs as requiredPressure Test Cooling SystemCheck Variable Speed (Droop) (Gen-Sets)Check Crankshaft Vibration Damper (6.8 L <strong>Engines</strong>) cFlush Cooling System dTest ThermostatsCheck and Adjust Engine Valve ClearanceAdd CoolantReplace Air Cleaner ElementsaReplace primary air cleaner element when restriction indicator shows a vacuum of 625 mm (25 in.) H2O.••••bChange the oil for the first time after 100 hours maximum of break-in operation. For subsequent oil and filter intervals, see recommendationsin section 10.cReplace crankshaft damper every 4500 hours or 60 months, whichever occurs first.dIf <strong>John</strong> <strong>Deere</strong> COOL-GARD is used, the flushing interval may be extended to 3000 hours or 36 months. If <strong>John</strong> <strong>Deere</strong> COOL-GARD is usedand the coolant is tested annually AND additives are replenished as needed by adding a supplemental coolant additive, the flushing intervalmay be extended to 5000 hours or 60 months, whichever occurs first.••••••••••••••••••••Continued on next pageOURGP11,0000007–19–31OCT06–1/220-4 110306PN=66

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!