12.07.2015 Views

OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

OMRG25204 oem uncert & tier 1.pdf - John Deere Industrial Engines

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Engine Operating GuidelinesVDO Instrument (Gauge) Panel (Except NorthAmerica)All controls and gauges are optional equipment for <strong>John</strong><strong>Deere</strong> OEM <strong>Engines</strong>. They may be provided by theequipment manufacturer instead of <strong>John</strong> <strong>Deere</strong>. Thefollowing information applies only to those controls andgauges provided by <strong>John</strong> <strong>Deere</strong>.IMPORTANT: Any time an electric gauge or meterdoes not register correctly, replace itwith a new one. Do not attempt to repairit.VDO Instrument PanelRG10606B –UN–20OCT99Following is a brief description of the components on theinstrument (gauge) panel:A—Oil Pressure Gauge - The oil pressure gaugeindicates engine oil pressure.B—Coolant Temperature Gauge - The coolanttemperature gauge indicates coolant temperature.C—Tachometer - The tachometer indicates engine speedin hundreds of revolutions per minute (rpm).A—Oil Pressure GaugeB—Coolant Temperature GaugeC—TachometerD—Engine Control LightE—Preheater LightF—Fuel Level LightG—Battery LightH—Oil Pressure LightI—Coolant Temperature LightJ—Key/Start SwitchK—Hour MeterThe engine control system consists of the following:D—Engine Control Light - The engine control lightilluminates after the engine has started and oil pressure isup to specification. The light indicates that the engineprotection circuitry is activated.E—Preheater Light - The preheater light illuminateswhen the key is turned to the bulb test position (positionI). It should go off after approximately five seconds. Whenthe key switch is held in position II, the engine preheateris energized and the preheater light illuminates.F—Fuel Level Light - The fuel level light illuminateswhen the key is turned to the bulb test position (positionI). It should go off after approximately five seconds. Afterthe engine is running, if the engine runs out of fuel, thelight will illuminate and protection circuitry will stop theengine. The fuel level light will remain on indicating theengine was stopped due to the fuel tank being empty.Continued on next pageDPSG,RG34710,109–19–08JAN02–1/215-4 110306PN=48

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!