Protégé® Eclipse LED Keypad Installation Manual

More documents

Recommendations

Info

16.0 Technical DiagramThe technical diagram shown below outlines the essential details needed to help ensure thecorrect installation of the Protégé® Eclipse LED Keypad.54mm4.5mmdiameter40mm34.5mm16.5mm10mm97mm48mmPRT-KLES82.5mm100.5mm107mm117mm10.5mm17.5mm37.5mm57.5mm64.5mm75mmFigure 21 - Technical Diagram31
17.0 Technical SpecificationsThe following technical specifications are important and vital to the correct operation of theProtégé® Eclipse LED Keypad. Failure to adhere to the technical specifications will result in anywarranty or guarantee that was provided becoming NULL AND VOID.Integrated Control Technology continually strives to increase the performance of its products andas a result the specifications may change without notice. It is recommended that you alwaysconsult www.incontrol.co.nz for the latest documentation and product information.Operating VoltageOperating CurrentUser Interface Display/KeypadZone Inputs (System Zones)Zone Inputs (Enclosure Tamper)PGM Outputs11.5VDC to 24VDC50mA (80mA max)Combined 15 key capacitive touch keypad with 10x zone status LEDsand 6x system status LEDs.4 using standard or duplexed mode.PCB mounted external micro switch assembly.1x open collector output for general functions (negative output, 50mAmax).Display and Audible FunctionsArmed, ready and beeperOperating Temperature5˚ to 55˚C (41˚ to 131˚F)Storage Temperature-10˚ to 85˚C (14˚ to 185˚F)Humidity0% to 85% (Non condensing)Dimensions (H x W x D) 118 x 75 x 19mm (4.65 x 2.95 x 0.9”)Weight148g (5.23oz)Specifications are subject to change without notice, please visit www.incontrol.co.nz for updated information.32
Page 1 and 2: Protégé® Eclipse LED KeypadInsta
Page 3 and 4: Table of Contents1.0 Welcome.......
Page 5 and 6: 1.0 Welcome!Thank you for purchasin
Page 7 and 8: 3.0 MountingThe Protégé® Eclipse
Page 9 and 10: 4.2 Communication ConnectionSupport
Page 11 and 12: Resistors should belocated at the d
Page 13 and 14: 5.0 Programmable OutputThe Protég
Page 15 and 16: 6.2 Disarmed IndicatorStateOffOnDes
Page 17 and 18: 7.0 Audible TonesWhen you press a k
Page 19 and 20: 9.0 Device Configuration9.1 Enterin
Page 21 and 22: Option 4 - Clear key toggles keypad
Page 23 and 24: 10.0 PRT-KLES Software SetupThe Pro
Page 25 and 26: 11.0 Keypad SetupThe Protégé® Ec
Page 27 and 28: 11.3 Options 2 TabFigure 18 - Optio
Page 29 and 30: 12.0 Area SetupThe Protégé® Ecli
Page 31 and 32: 13.0 User SetupNo special User setu
Page 33: 15.0 Mechanical DiagramThe mechanic
Page 37 and 38: 19.0 WarrantyThe Seller warrants it
Page 39 and 40: This page has been intentionally le

Protégé® Eclipse LED Keypad Installation Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?