Part 2

488 ?lug-In Assembly ConfigurstionIf we assume that the wiring capacitance is about 0.05 pF, we can computethe required value of Cp from:Cp = C - (Cact + Cwiring) = 0.144 40.047 + 0.05) = 0.047 pFSince Rp can vary between 42.5 ohms and 400 ohms, an appropriate networkto be connected across the load is Rp = 200 ohms, Cp = 0.047pFas shown in (b). Naturally, other combinations within these ranges can beused as long as the peak current and contact voltage limits for the actuatorare not exceeded.(a) WITHOUTACTUATOR TERM ,CARD I CARD II ! V=170V PEAKLOADL=. 1HWITH EXT C/PACTUATORTERM,CARD 1 CARD ILOADWITHOUT EXT C/PWITH EXT C/P.425A1.3A425V PEAK353V PEAKArtisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com