Part 2

I INTERRUPT ON OVERFLOW - PERIODIPULSE WIDTH MODE IExample 3497A Configurations 60710 CLEAR 709ON INTR 7 GOSUB 1000ENABLE INTR 7;8OUTPUT 709; "SE2CE4,2CF4,3"!Main ProgramGOT0 50ENDP = SPOLL (709)IF P < >66 RETURNOUTPUT 709;"D14"ENTER 709;AIF A = 3 PRINT "SLOT 4 - OVERFLOW - RANGE EXCEEDED"STATUS 7,l;ARETURNTYPICAL PRINTOUTSProgram Printout 1(a)(b)(c)(dlSLOT 4 - ZERO COUNTS REACHEDSLOT 4 - MEASUREMENT COMPLETESLOT 4 - OVERFLOW - >999999 COUNTSSLOT 4 - OVERFLOW - RANGE EXCEEDEDCOMMENTSNote that the return from a Dl slot# command for the counter card is different fromthe return for an Option 050 (Digital Input/lnterrupt) assembly. That is, for an Option050 assembly, the return shows the true (high) bits in the 16 channels of theassembly, but the counter assembly returns only two values (1 or 3) when an interruptoccurs.If you send a Dl slot# command to a-counter card which did not interrupt, a valueof 0 is returned.Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com