Part 2

MAINFRAME CONFIGURATIONInstallation and Mainframe Configuration 355When you received your new 3497A, it was factory preset for the configuration youspecified. In many cases, factory settings will be correct for your application. If,however, you need to change the configuration of the 3497A mainframe, see thispart of the chapter for details. If you need to change the configuration of the pluginassemblies or the 3498A, see Chapter 8.This part of the chapter shows how to make hardware changes to the 3497A mainframe,but does not show how to make alignments or adjustments. See the 3497AMainframe Installation and Service Manual for this information. See the followingchart to locate the specific configuration function required1 3497A MAINFRAME CONFIGURATION IFUNCTIONChange AnalogAddressesSet ClockFormatClock BatteryBack-upChange Line VoltsChange HP-IBAddress SwitchSet Serial DataOperating ConditionsDESCRIPTIONChange analog addressing scheme so that up to 10channels (lldecade, 21slot) can be closed with asingle command.Set real-time clock for Option 230 or 231 format.Reset the 3497A so that battery back-up for thereal-time clock is supplied whenever the AC poweris disconnected.Set the 3497A for AC line input of IOOV, 120V,220V or 240V.For a 3497A with HP-IB capability, reset the HP-IBaddress and set TALK ONLY and POWER ON SRQcapabilities.For a 3497A with Serial Data (RS-232 or RS44914231, set RS-233 or SS-4491423 operation, director MODEM connection to controller, handshake,speed of operationlnumber of stop bits, word lengthand parity for desired operation.PAGEArtisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com