Part 2

380 Plug-In Assembly ConfigurationTerminal Card ConfigurationThe terminal card provides the interface between the relay card and your systemtransducers. To connect your system inputs to the terminal card, see Figure 78. Notethat each channel has a separate set of three connectors (HI, LO and GUARD), sothree wires must be connected for each channel.To connect your inputs, remove the terminal card cover by loosening the four screwsand route wires as shown in Figure 78 to provide strain relief for the wires.A COMMTERM 'I2. ROUTE WIRES FORCHANNEL INPUTSFigure 78. Option 010 - Connecting Inputs to the AssemblyArtisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com