Part 2

350 Installation and Mainframe Configuration1 EXAMPLE - RS232C OPERATION SELF-TEST IProgram Lines Description10 RESET 10 10 Clears interface with ISC of 10.20 OUTPUT 10; "ST1 "30 ENTER USING "#,K"; A 20 Turns self-test ON.40 DlSP A50 OUTPUT 10; "STO" 30-40 Displays result of self-test. 8E860 END returned if self-test passes.50 Turns self-test OFF.Connecting the 3497A to Your SystemWhen the 3497A passes the self-test, it is ready for operation and can be connectedto your system. When connecting the 3497A to your system, you may want to seeChapter 9 for example ways to make voltage, resistance, thermocouple, frequencyor pressure measurements or to do control applications such as interrupts, switchingand control sources.To connect your system to the 3497A, inputs must be connected to appropriate terminalson the plug-in assemblies (Options 010 through 140). Before attaching anysystem inputs to the assemblies, see Chapter 8 which shows how to configure eachassembly for various modes of operation.r system inputs to thelete a 3497A System LogHP-IB INSTALLA TION in thisnent record of the inputs349 7A.located in Appendix B so thatease of reference, we suggestform for each plug-in assemblyI1 forms be filed in a folder toArtisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com