Part 2

564 Example 3497A ConfigurationsCONFIGURATIONTo set up the 3497A for single ended measurements, it is necessary to reconfigureboth the 3497A inguard controller and the Option 010 assembly which is to be installedin slot 4 ONLY. It is not necessary to modify the other 4 assemblies.To configure the 3497A, see Figure 185. Ensure that all voltage sources are removedfrom the 3497A then remove the protective cover and the inguard controller. Openjumpers JMPl and JMP2 on the inguard controller board and replace the inguard controllerand protective cover.To configure the Option 010 assembly to be placed in slot 4, see Figure 186. Forthis assembly ONLY, the seven B Decade inputs (V271 - V277) are connected tothe HIGH connectors for relays 83 through B9 respectively, and BO, B1 and 82 areused for secondary multiplexing.To configure the other four Option 010 assemblies, follow the connection diagramshown for the A Decade in Figure 186 for both the A Decade and B decade inputs.OPtiN JMPlAN[] JMP2 ONINLUARDCO!lTROLLER90ARDFigure 185. Example 2 - Configuring 3497A for Single-Ended MeasurementsArtisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com