Part 2

654 Specifications and General lnformationAccuracy at Vs = 5 voltsTemperatureBridge 24 Hr. 90 Day 590 Days CoefficientType f 1°C 23 f 5'C 23 + 5'C (0.18.28-55°C)Accuracy At V, = 100 mVFull 20 pe 35 yc 0.04% 40 ue 75 uc 0.9 uc1Mo.Full 1 pe 1 pe 0.04 peIMo. 0.025 pel°C% 4 5 pe 0.4 pelMo. 0.3 peI0C'/4 7 25 pe 1.8 pelMo. 1.8 pcl°CAccuracv At Vr = 1 Volt1 Full 3 uc 3.5 ut 0.04 uelMo. 0.1 ueI0C IAll Specifications Are kThese figures assume a gauge factor of 2.Maximum self-heating offset due to change in the numberof gauges on one assembly: 0.3 pe per gauge (Vs = + 5,R, = 120 Q, % bridge)Maximum self-heating offset due to .1 V change in supplyvoltage: 0.38 pe (Vs = + 5, R, = 120 Q, % bridge).OPTION 11 0ACTUATORIDIGITAL- OUTPUT ASSEMBLYInput CharacteristicsContact Ratings: Voltage: * 100 V peakCurrent: 1 amperelchannelPower: 100 volt ampereslchannelCAUTION: For use only in circuits fused at 1 ampere or lessand less than 100 VA.Thermal Offset: < 20 pVAC PerformanceContact Capacitance: < 15 pFInterchannel Capacitance: < 30 pFFrequency Response(1 0 kHz Reference) f < 100 kHz f < 1 MHz50 Ohm Termination * .3 dB + .5 dBI l M Ohm Termination k.3 dB +.5 dB ICross TalkI 1M Ohm Termination 27lsecond (Using 9835A)Switch Life: > 1010 with contact ~rotection+ 5V Supply: Source up to 50 mA per assemblyOperating Considerations: Should not be used in a position greaterthan 30° above horizontalHandshake Lines: Optically isolated, TTL compatible, open collectoroutputArtisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com