Fs-3040mfp fs-3140mfp og eng - KYOCERA Document Solutions

Adjusting Density
Use the procedure below to adjust the density when scanning the originals.
The table below shows the available settings.
Item Detail
Manual Adjust density using 7 levels.
Auto Optimum density is selected according to the
density of the original.
The procedure for adjusting the density is explained below.
Function Menu: a b
*********************
1 Color Selection T
2 Original Size T
3 Original Image T
[ Exit ]
Density: a b
1 Auto
*********************
2 *Manual
1 Press the Send key.
2 Place the original.
5-13
Sending Functions
3 Press the Function Menu key. Function Menu appears.
4 Press the � or � key to select [Density].
5 Press the OK key. Density appears.
6 Press the � or � key to select [Auto] or [Manual].
If you select [Manual], press the OK key, and then select
the density on the next screen.
7 Press the OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
8 Specify the destination, and press the Start key to start
sending.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
5