Fs-3040mfp fs-3140mfp og eng - KYOCERA Document Solutions

Use the procedure below to enable user login administration.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
Login User Name L b
*******************
Login Password:
[ Login ]
Sys. Menu/Count.: a b
*********************
4 User/Job Account
5 User Property
6 Common Settings
[ Exit ]
User/Job Account: a b
*********************
1 User Login Set.
2 Job Account. Set.
3 Unknown ID Job
[ Exit ]
User Login Set.: a b
*********************
1 User Login
2 Local User List
3 Group Auth.
[ Exit ]
User Login: a b
*********************
1 *Off
2 Local Authentic.
3 Netwk Authentic.
11-3
Management
1 Press the System Menu/Counter key on the main unit
operation panel.
If user login administration is disabled, the user
authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you
need to log in with administrator privileges. Refer to
Adding a User on page 11-6 for the default login user
name and password.
2 In the Sys. Menu/Count. menu, press the � or � key to
select [User/Job Account].
3 Press the OK key. The User/Job Account menu appears.
4 Press the � or � key to select [User Login Set.].
5 Press the OK key. The User Login Set. menu appears.
6 Press the � or � key to select [User Login].
7 Press the OK key. User Login appears.
8 Press the � or � key to select [Local Authentic.] or
[Netwk Authentic.], and then press the OK key.
11