Fs-3040mfp fs-3140mfp og eng - KYOCERA Document Solutions

When KPDL Is Selected for Emulation
8-75
Default Setting (System Menu)
When you use the KPDL emulation mode, set whether or not to output KPDL error reports. The default setting is Off.
Use the procedure below to make the setting.
When KPDL(Auto) Is Selected for Emulation
1 In Emulation Set, press the � or � key to select [KPDL].
2 Press the OK key. KPDL Error Rpt appears.
3 Press the � or � key to select [Off] or [On].
4 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
If you use the KPDL(Auto) emulation mode, KPDL and another emulation mode can be automatically switched
according to the data (alternative emulation).
For alternative emulation, you can select one of the following printers. The default setting is PCL6.
• Line Printer
• IBM Proprinter
• DIABLO 630
• EPSON LQ-850
• PCL6
Emulation Set.: a b
5 PCL6
*********************
6 KPDL
7 KPDL(Auto)
KPDL Error Rpt: a b
1 Off
*********************
2 *On
Also, as when you select [KPDL], set whether or not to output KPDL error reports. The default setting is Off.
Use the procedure below to make the setting.
Emulation Set.: a b
5 PCL6
6 KPDL
*********************
7 KPDL(Auto)
1 In Emulation Set, press the � or � key to select
[KPDL(Auto)].
8