Fs-3040mfp fs-3140mfp og eng - KYOCERA Document Solutions

Specifying Paper Size and Media
2-43
Preparation before Use
The default paper size setting for cassette, for multi purpose tray and for the optional paper feeder (cassettes 2 to 4)
is [Letter], and the default media type setting is [Plain].
To fix the type of paper to be used in cassettes, specify the paper size and media type setting. (Refer to Specifying
Paper Size and Media Type for the Cassettes on page 2-43.)
To fix the type of paper to be used in multi purpose tray, specify the paper size setting. (Refer to Specifying Paper
Size and Media Type for the Multi Purpose Tray on page 2-45.)
Specifying Paper Size and Media Type for the Cassettes
To fix the type of paper to be used in cassette or the optional paper feeder (cassettes 2 to 4), specify the paper size.
Also, you use a media type other than plain paper, specify the media type setting.
Selection Item Selectable Size/Type
Paper Size Select from the standard sizes. Selectable paper
sizes are as follows.
Inch size: Letter, Legal, Statement* and Oficio II
Metric size: A4, A5, A6*, B5, Folio, and 16K
Media Type Plain, Rough, Recycled, Preprinted, Bond, Color,
Prepunched, Letterhead, High Quality and
Custom 1~8**
* Statement and A6 can only be used in cassette 1.
** To change to a media type other than Plain, refer to Paper
Weight on page 8-16.
NOTE: If using the FS-3140MFP, the available media types for printing received faxes are as shown below.
Plain, Recycled, Bond, Color, High Quality and Rough
When the paper size dial on a cassette is set to OTHER, a paper size can be set for the cassette.
Login User Name: L b
********************
Login Password:
[ Login ]
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
5 Common Settings
1 Press the System Menu/Counter key on the main unit
operation panel.
When you are performing user management and have
not logged in, a login screen will appear. Then, enter the
user ID and password to log in.
NOTE: Refer to Character Entry Method on Appendix-5 for
details on entering characters.
2 In the Sys. Menu/Count. menu, press the � or � key to
select [Common Settings].
2