Fs-3040mfp fs-3140mfp og eng - KYOCERA Document Solutions

Group Auth.: a b
*********************
1 *Off
2 On
Displaying Network User Propertiy
7 Press the OK key. Group Auth. appears.
8 Press the � or � key to select [On] or [Off].
9 Press the OK key.
11-12
Management
Completed. is displayed and the screen returns to the
User/Job Account menu.
Use the procedure below to display the property of the user logged on using the network authentication. This menu
can be used only when [Netwk Authentic.] is selected as the user authentication method.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
Sys. Menu/Count.: a b
*********************
4 User/Job Account
5 User Property
6 Common Settings
[ Exit ]
Login User Name L b
*******************
Login Password:
[ Login ]
User/Job Account: a b
*********************
1 User Login Set.
2 Job Account. Set.
3 Unknown ID Job
[ Exit ]
1 Press the System Menu/Counter key on the main unit
operation panel.
2 In the Sys. Menu/Count. menu, press the � or � key to
select [User/Job Account].
If user login administration is disabled, the user
authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you
need to log in with administrator privileges. Refer to
Adding a User on page 11-6 for the default login user
name and password.
3 Press the OK key. The User/Job Account menu appears.
4 Press the � or � key to select [User Login Set.].