Fs-3040mfp fs-3140mfp og eng - KYOCERA Document Solutions

WSD Scan Setup
Network Setting: a b
*********************
1 TCP/IP Settings
2 NetWare
3 AppleTalk
[ Exit ]
AppleTalk a b
1 Off
2 *********************
*On
Select whether or not to use WSD Scan. The default setting is On.
8-130
Default Setting (System Menu)
3 Press the � or � key to select [Network Setting].
4 Press the OK key. The Network Setting menu appears.
5 Press the � or � key to select [AppleTalk].
6 Press the OK key. AppleTalk appears.
7 Press the � or � key to select [On] or [Off] and then
press the OK key.
Completed. is displayed and the screen returns to the
Network Setting menu.
Use the procedure below to setup the WSD-SCAN setting. The machine must be restarted after the setting is
changed.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
3 System
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
1 Network Setting
2 I/F Block Set.
3 Security Level
[ Exit ]
1 In the Sys. Menu/Count. menu, press the � or � key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System menu appears.
3 Press the � or � key to select [Network Setting].